DIY Question

[996TT_STEVO]

How easy to change Ratios on SR3 RS?

[Steve57]

Havent done so myself but explained in the manual here on page 14 http://www.radicalsportscars.se/wp-content/uploads...

[fatboy247]

It's simple, only takes 15 minutes, drain the oil, undo all the bolts around the cover and gently pry it off, you need a couple if large sockets to undo the gears (one is left hand thread) pull them out and repeat the steps backwards.... Very simple

[996TT_STEVO]

fatboy247 said:

It's simple, only takes 15 minutes, drain the oil, undo all the bolts around the cover and gently pry it off, you need a couple if large sockets to undo the gears (one is left hand thread) pull them out and repeat the steps backwards.... Very simple

Superb.. thank you very much

[Ron V]

The sockets are 33mm and 42mm. The 42mm is reverse thread. Use loctite when reinstalling both nuts. Peen not so important.

Ron