|
lazyitus
Original Poster
18,903 posts
135 months
|
Anyone have part number(s) for a 5.0ltr Griff oil filter please?
I assume you can pick them from a regular Halfords shelf?
Cheers
Lazy
|
|
|
del 203
12,727 posts
118 months
|
I bought six from Landy dealer not expensive iirc
|
|
|
lazyitus
Original Poster
18,903 posts
135 months
|
Do you know a part number Del ?
|
|
|
PeteGriff
441 posts
26 months
|
lazyitus said: Anyone have part number(s) for a 5.0ltr Griff oil filter please?
I assume you can pick them from a regular Halfords shelf?
Cheers
Lazy Use a Land Rover outlet. I use the same in my Griff as in my Land Rover Defende! Just look online in Land Rover outlets, the same filter fits the Range Rover 3.9, 4.2, 4.9 etc as well as the Defender variants. I buy the Coopers filters by the pack of 10 for both vehicles, last batch cost me about £32 delivered! Don't forget you will need a new sump plug copper sealing washer. All the best, Pete
|
|
|
FlipFlopGriff
4,879 posts
116 months
|
lazyitus said: Do you know a part number Del ? I'm not Del (thankfully), but ERR3340. FFG
|
Advertisement
|
|
|
del 203
12,727 posts
118 months
|
FlipFlopGriff said: lazyitus said: Do you know a part number Del ? I'm not Del (thankfully), but ERR3340. FFG You wish 
|
|
|
lazyitus
Original Poster
18,903 posts
135 months
|
 Thanks chaps, very helpful as ever.  PeteGriff said: Don't forget you will need a new sump plug copper sealing washer.  Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer??
|
|
|
FlipFlopGriff
4,879 posts
116 months
|
lazyitus said: Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer?? No you don't. Got my filters here: http://www.paddockspares.com/err3340g-oil-filter-g...Cheap for genuine LR filters, although I've got a fibreglass filter on the pre cat now but it don't fit the 500 - too long FFG
|
|
|
lazyitus
Original Poster
18,903 posts
135 months
|
|
|
big geoff
329 posts
69 months
|
note some cars need the shorter filter not ERR 3340 which is long
|
|
|
lazyitus
Original Poster
18,903 posts
135 months
|
big geoff said: note some cars need the shorter filter not ERR 3340 which is long  Which cars??? I've bought my 3340 now!!
|
|
|
FlipFlopGriff
4,879 posts
116 months
|
lazyitus said: Which cars??? I've bought my 3340 now!! What's on it now? ERR3340 is about 5 inches long as a guess. Not heard of many having a short filter, longer the better anyway. FFG
|
|
|
Barreti
5,171 posts
106 months
|
Not a bad guess Paul. I just plopped the Z1159 Coopers version of ERR3340 onto the bench and measured it at 107mm or 10.7cm or 4.3/16" I just wanted an excuse to be in the garage for a bit
|
|
|
PeteGriff
441 posts
26 months
|
Barreti said: Not a bad guess Paul. I just plopped the Z1159 Coopers version of ERR3340 onto the bench and measured it at 107mm or 10.7cm or 4.3/16" I just wanted an excuse to be in the garage for a bit This is the same Coopers filter I mentioned in my previous message. Great filters and at the price they are an oil & filter change more frequently is no excuse. Regards, Pete
|
|
|
Barreti
5,171 posts
106 months
|
lazyitus said: Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer?? You're right Lazyitus, fit the SH sump plug and forget the copper washer. Alternatively you get them from any LR dealer or an indie working on Landys. You can anneal them too apparently, though I've never tried it.
|
|
|
lazyitus
Original Poster
18,903 posts
135 months
|
FlipFlopGriff said: What's on it now? Dunno, not been near the car in the last few days. Will check but from memory it seemed to be the same sort of length as the new one I bought yesterday. I'm sure it will be. Barreti said: lazyitus said: Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer?? You're right Lazyitus, fit the SH sump plug and forget the copper washer. Alternatively you get them from any LR dealer or an indie working on Landys. You can anneal them too apparently, though I've never tried it. Thanks mate. 
|
|
|
lazyitus
Original Poster
18,903 posts
135 months
|
Me again. Just out of interest, where would I source a copper ring for the sump plug? My Steve Heath magnetic plug didn't fit properly for some reason ( we tried, believe me, we tried  ) so ended up putting the old plug back in and didn't have a spare copper ring. 
|
|
|
PeteGriff
441 posts
26 months
|
lazyitus said: Me again. Just out of interest, where would I source a copper ring for the sump plug? My Steve Heath magnetic plug didn't fit properly for some reason ( we tried, believe me, we tried ) so ended up putting the old plug back in and didn't have a spare copper ring. Hi there, its a Land Rover part as used on Defender 200Tdi, 300Tdi, V8, also Range Rover Classic. I use the same one as I keep for my Defender 90, regards, Pete
|
|
|
Simon says
9,270 posts
90 months
|
A good car accesory shop should have a good selection of solid copper sump washers to fit the bill.
|
|
|
lazyitus
Original Poster
18,903 posts
135 months
|
|
