Pre Cat Griffith Wheel Centres
Discussion
JamesK said:
That's good news. I'll take a set. Might even buy 2 if they're any good!
Once my split rims are finally sorted I'll be refurbing the Amil's so these will be very handy.
Hi James, shall I put you down for two sets then? They are £4.50 a set? Will add on whatever the postage is at the time. Regards, PeteOnce my split rims are finally sorted I'll be refurbing the Amil's so these will be very handy.
FlipFlopGriff said:
Pete, are they purple background as originals or different?
Rather pay a bit more for somthing similar to the original.
FFG
Hi Paul, the ones I saw as examples on their website are black. I know what you mean as I have one original cap and the logo is metal and its a very dark blue background. I will have gold TVR logo on my badges as my Griffith and front TVR badge are special edition 'gold' coloured. I will ask if they can do a dark blue background. All the best, PeteRather pay a bit more for somthing similar to the original.
FFG
I would like to say a huge thanks to PeteGriff and FlipFlopGriff. I've just ordered 6 from the previous link, it was only £29.70 including postage as I made payment over the phone!
I will upload some pictures when they're powdercoated.
I have been searching the original centre caps for around 18 months; they're made of unobtanium.
What is happening about the domed TVR decals? I was corresponding with a helpful guy form PH via email about getting a batch made in the original colour; although I lost all hope of finding a suitable cap so it went no further.
I will upload some pictures when they're powdercoated.
I have been searching the original centre caps for around 18 months; they're made of unobtanium.
What is happening about the domed TVR decals? I was corresponding with a helpful guy form PH via email about getting a batch made in the original colour; although I lost all hope of finding a suitable cap so it went no further.
ChrisRoe89 said:
I would like to say a huge thanks to PeteGriff and FlipFlopGriff. I've just ordered 6 from the previous link, it was only £29.70 including postage as I made payment over the phone!
I will upload some pictures when they're powdercoated.
I have been searching the original centre caps for around 18 months; they're made of unobtanium.
What is happening about the domed TVR decals? I was corresponding with a helpful guy form PH via email about getting a batch made in the original colour; although I lost all hope of finding a suitable cap so it went no further.
I am probably going to go with the resin custom made ones I reported on above! I want a gold TVR logo and they are willing to do that. I don't mind a black background at all. As discussed before the original Gotti centre cap badges were domed, the only way now to get those is to have them made in aluminium and the logo screen printed! They would be very expensive! All the best, PeteI will upload some pictures when they're powdercoated.
I have been searching the original centre caps for around 18 months; they're made of unobtanium.
What is happening about the domed TVR decals? I was corresponding with a helpful guy form PH via email about getting a batch made in the original colour; although I lost all hope of finding a suitable cap so it went no further.
PeteGriff said:
JamesK said:
That's good news. I'll take a set. Might even buy 2 if they're any good!
Once my split rims are finally sorted I'll be refurbing the Amil's so these will be very handy.
Hi James, shall I put you down for two sets then? They are £4.50 a set? Will add on whatever the postage is at the time. Regards, PeteOnce my split rims are finally sorted I'll be refurbing the Amil's so these will be very handy.
Paul, that sounds like a more achievable solution, purple TVR logo. As I said I am going for Gold as I have gold front TVR and rear Griffith badges. I am also having a standard silver set just to compare. At £4.50 for 4 can't go wrong. I shall enquire re the purple before ordering.
Ian, yes you are correct the resin type badges do have a domed effect, but that is the resin filler, the logos are on the back so appear flat.
Regards, Pete
Ian, yes you are correct the resin type badges do have a domed effect, but that is the resin filler, the logos are on the back so appear flat.
Regards, Pete
A quick update from me.
I talked to Paul at Leven today and he wasn't even vaguely interested.
Pete, put me down for a set of decals with black background and silver logo.
Put me down for 2 sets if you look like struggling to get numbers to make up an order mate and let's get cracking.
I talked to Paul at Leven today and he wasn't even vaguely interested.
Pete, put me down for a set of decals with black background and silver logo.
Put me down for 2 sets if you look like struggling to get numbers to make up an order mate and let's get cracking.
Barreti said:
A quick update from me.
I talked to Paul at Leven today and he wasn't even vaguely interested.
Pete, put me down for a set of decals with black background and silver logo.
Put me down for 2 sets if you look like struggling to get numbers to make up an order mate and let's get cracking.
Thats the trouble Ian, nobody is interested! Before doing the dashboards and other bits I found that all outlets wanted to do was sell the existing TVR type stuff for stacks of cash! Have put you on the list mate. Regards, PeteI talked to Paul at Leven today and he wasn't even vaguely interested.
Pete, put me down for a set of decals with black background and silver logo.
Put me down for 2 sets if you look like struggling to get numbers to make up an order mate and let's get cracking.
The six centre caps arrived this morning. I am amazed at how well they fit, so once again, a big thanks to you guys for finding them!
All six have been sent to the powdercoaters for a light blast and satin finish; not bad for £20. I anticipate they will be back on Wednesday.
I will finally be able to fit my freshly refurbished Gotti wheels
Pictures to follow.
All six have been sent to the powdercoaters for a light blast and satin finish; not bad for £20. I anticipate they will be back on Wednesday.
I will finally be able to fit my freshly refurbished Gotti wheels
Pictures to follow.
ChrisRoe89 said:
The six centre caps arrived this morning. I am amazed at how well they fit, so once again, a big thanks to you guys for finding them!
All six have been sent to the powdercoaters for a light blast and satin finish; not bad for £20. I anticipate they will be back on Wednesday.
I will finally be able to fit my freshly refurbished Gotti wheels
Pictures to follow.
Chris, did you take the aluminium disc with MG printed off before sending to powder coating? I took mine off, not only because I waned to put the new badges onto the flat cap surface, but also because they are stuck in with glue whig will melt when powder coated (done in ovens at 200C). Best regards, PeteAll six have been sent to the powdercoaters for a light blast and satin finish; not bad for £20. I anticipate they will be back on Wednesday.
I will finally be able to fit my freshly refurbished Gotti wheels
Pictures to follow.
I am going to order the 47mm wheel centre badges later this week as well as myself I have on the list:
Barretti - 1 set
James K - 2 sets
Dave Peck - 1 set
Brian (The Prisoner) - 1 set
If I don't have any interest from anybody else by Wednesday this week will place the order Thursday.
All the best, Pete
Barretti - 1 set
James K - 2 sets
Dave Peck - 1 set
Brian (The Prisoner) - 1 set
If I don't have any interest from anybody else by Wednesday this week will place the order Thursday.
All the best, Pete
Gassing Station | Griffith | Top of Page | What's New | My Stuff