What's this wire...?

[Greg M]

'92 PreCat....is it used...?

[PeteGriff]

Greg M said:

'92 PreCat....is it used...?

Hi Greg, there are some apparent unused wires/connections in the engine bay. As the loom is essentially a Land Rover item there are connections in the loom for uses not required on the Griff. My 430 has the same. Hope thats of some help? All the best, Pete

[Greg M]

Very helpful, thanks Pete. Can you remind me where the earth is fixed to..? In my mind it's somewhere around the swirl pot...

[stevesprint]

PeteGriff said:

Hi Greg, there are some apparent unused wires/connections in the engine bay. As the loom is essentially a Land Rover item there are connections in the loom for uses not required on the Griff.

For example Precats don't have a carbon canister purge valve.

Greg M said:

Can you remind me where the earth is fixed to..?

Might be the earth off the anti-roll bar bracket, its a pig to get to.

========= EDIT =================

Greg M said:

In my mind it's somewhere around the swirl pot...

Greg
Sorry, on second thoughts the drivers side anti-roll bar bracket is not near the swirl pot, therefore maybe one of the following engine earths:

passanger side fuel rail or rear of head
under alternator

Edited by stevesprint on Wednesday 25th May 23:54

[Ballistic Banana]

This is the old engine loom in my old Griffith which is a rv8 one with loads of unneeded parts



and the new one made by PJ wiring for the new ecu coil pack etc



quite a difference in weight alone.

BB