GEMINI DIAGRAM NEEDED

[waggy]

After my problems in france with the battery failing and then alarm going off, i have decided to remove the Gemini 1002 alarm. when I took apart the siren under the bonnet the pcb was very corroded and some of the capacitors are hanging off. rather than fitting a new alarm i would rather remove it completely. The car has a cobra immobiliser fitted so alarm not really needed.

Has anybody or know anybody who has a diagram for the Gemini 1002 alarm. im sure quite a few owners have had the same problem. i have searched the interweb but cannot find anything.

any info appreciated..

Alex

[waggy]

Found out the alarm module is 2339

Found diagram for 2339 which matches the module on my car

http://obrazki.elektroda.pl/8790535200_1291881104....

[jeboa]

Alex,

Aren't you going to need an alarm to lock/unlock the doors?

Replaced my Gemini with a TOAD Ai606 - about £120 from Ebay, has the added bonus of an additional output, so you can open the boot from the keyfob.

[waggy]

I only want to get rid of the siren under the bonnet. The alarm box under radio controls door lock, would keep that.

Theres 9 wires from siren to fusebox , just need to work out what each wire does,,