My Murci's new look for 2010,
Discussion
Kylie said:
Nice one! Put some 30 purple pin stripes between the CF and pearl, down middle of bonnet and poss up on rear buttress area - as an idea?
People are either gonna love it or purists will dislike what you have done. Enjoy it.
You're awake early? Still have the option to go back for stripes and pin stripes as they have been payed for. Gonna think on it. The bonnet looks great in the flesh, the textured carbon is layed at an angle, but symmetrically about the centreline and gives the impression of a fold. Wanted to be different too. If it was white it'd be like an SV scheme.People are either gonna love it or purists will dislike what you have done. Enjoy it.
Edited by diablo_pete on Friday 2nd April 21:12
Edited by diablo_pete on Friday 2nd April 21:30
Primo said:
Like it Pete. You can see the "weave" on the bonnet slightly in the pictures - must look good in the flesh! Got a hint of Zonda PS there as well.... 
Oh yeah, what an accident

Edited by diablo_pete on Friday 2nd April 21:23
diablo_pete said:
Kylie said:
Nice one! Put some 30 purple pin stripes between the CF and pearl, down middle of bonnet and poss up on rear buttress area - as an idea?
People are either gonna love it or purists will dislike what you have done. Enjoy it.
You're awake early? Still have the option to go back for stripes and pin stripes as they have been payed for. Gonna think on it. The bonnet looks great in the flesh, the textured carbon is layed at an angle, but symmetrically about the centreline and gives the impression of a fold. Wanted to be different too. If it was white it'd be like an SV scheme.People are either gonna love it or purists will dislike what you have done. Enjoy it.
Edited by diablo_pete on Friday 2nd April 21:12
Edited by diablo_pete on Friday 2nd April 21:30


Caelum Blue said:
Like it, just agree with others, I think it would better with a white bonnet. 
Having done the photoshopping, this looked better as the back of the car would look too different from the front with a white bonnet. Plus I wanted something a bit different from the norm. Would be better if the murci bonnet tappered the other way though. The area behind the front plate should also be carbon, and will get done as the drawings were mis-read.
Good thing is, a white bonnet is only a sheet of plastic away for a different look! Intend to change the look from time to time anyway. At least only half the car has to be changed at a time with this scheme.

lordbluf said:
Great looking car. Did it start off in white, or is that a white wrap? Was the carbon wrap expensive?
Hi,The car is pearlescent purple. The wrap is a new product that is effectively a flip paint. Areas turn light purple/ light green etc in light, but is white. The 1st picture taken in daylight shows this a bit.
The carbon and pearl white is more pricey. The carbon used is the textured one that gives the correct shimmer and light changing effect. The photos don't do it justice really. The door shuts are carbon too.
Edited by diablo_pete on Saturday 3rd April 00:00
Gassing Station | Supercar General | Top of Page | What's New | My Stuff