Good exhaust fitter in/near Warwickshire
Discussion
Hi all, I'm hoping for a recommendation for an Exhaust fitter somewhere in Warwickshire, who I can trust to do a good job of fitting an Eisenmann rear section to my 550i. I have the part already (used bargain), but in order to fit it, the existing rear section has to be cut off as there is no joint in the OEM system. Not a huge job I'm sure, but I've also heard that part of the inner bumper plastic has to be modified to accomodate the body of the exhaust, which is a bit annoying.
I'd also like to be able to easily revert back to standard if needed so would like the job to be done with flanges (inc putting a flange on the old rear section) rather than welding.
I've ruled out MIJ and A44 Exhausts.
Many thanks,
Mark
I'd also like to be able to easily revert back to standard if needed so would like the job to be done with flanges (inc putting a flange on the old rear section) rather than welding.
I've ruled out MIJ and A44 Exhausts.
Many thanks,
Mark
Gassing Station | Midlands | Top of Page | What's New | My Stuff