Squeaky rear window
Squeaky rear window
Author
Discussion

S6 Devil

Original Poster:

3,556 posts

262 months

Wednesday 1st April 2009
quotequote all
The rear screen is squeaking and driving me mad. I have the velcro along the top edge and have put silicon spray round the screen edge but still it squeaks. I had a look at mytuscan.co.uk and they suggest "Anti-squeak tape on the inside lip of the boot lid near the rear screen catches".

What is anti squeak tape!

Demon tweaks have all sorts of tape but nothing that specifies anti squeak. I know it's April the 1st but am I missing something?

WhyTwo

1,159 posts

221 months

Wednesday 1st April 2009
quotequote all
I put the velcro on the top of the screen on my previous Tuscan and it solved the problem. My latest one has the velcro on the underside of the bootlid where it touches the screen - applied by the previous owner, no squeaks. Could be worth a go?

NCE 61

2,457 posts

310 months

Wednesday 1st April 2009
quotequote all
Anti squeak tape is listed as leading edge tape

Most of the 'squeaking' problem is from the contact point between the screen and the boot lid and adding the tape here can help.Although the best fix I have found is to replace the screen clips with the metal ones form CT and the stop this contact with the boot lid as the clips do not bend like the plastic ones.

S6 Devil

Original Poster:

3,556 posts

262 months

Wednesday 1st April 2009
quotequote all
Thanks Guys!

Andy_350z

116 posts

230 months

Wednesday 1st April 2009
quotequote all
you can buy velcro 10mm circular pads, i just stuck them on the matin areas worked a treat!

Chim326

279 posts

242 months

Wednesday 1st April 2009
quotequote all
Tried velcro on top of screen inside and out which worked ok, but for some reason it kept popping roof open on one side so I took the velcro of and replaced it with black electrical tape, Happy days it works a treat, left a strip of velcro across bottom where the boot seal meets the screen

Mopster

9 posts

221 months

Sunday 3rd May 2009
quotequote all
Leading edge tape is absolutley fantastic.I bought some and have stuck it around the screen. You can't see it, it's very flexible so easy to fit and has 100% solved the problem. Highly recomended.

S6 Devil

Original Poster:

3,556 posts

262 months

Sunday 3rd May 2009
quotequote all
Mopster said:
Leading edge tape is absolutley fantastic.I bought some and have stuck it around the screen. You can't see it, it's very flexible so easy to fit and has 100% solved the problem. Highly recomended.
Do you need the 4", 100mm width or will a 2", 50mm width do the job?
http://merlinmotorsport.co.uk/product_info.php?pro...

Edited by S6 Devil on Sunday 3rd May 18:44

BDM

408 posts

211 months

Monday 4th May 2009
quotequote all
Where abouts do you stick this tape? Any pictures?

Thanks

NCE 61

2,457 posts

310 months

Monday 4th May 2009
quotequote all
BDM said:
Where abouts do you stick this tape? Any pictures?

Thanks
Stick it to the outside edge of the screen on the top edge.This picture shows the position, but in this case velcro was used:-



Later cars come with anti-squeak tape already fitted to the top edge screen and some dealers also fitted a strip of velcro to the bottom of the screen to prevent it rubbing on the boot lid, although if you fit the metal screen clips this should not be necessary.

BDM

408 posts

211 months

Monday 4th May 2009
quotequote all
Legend... Thanks mate...

Is Velcro better than the Leading Edge tape? Will do this next weekend for sure.

Robertjp

2,281 posts

254 months

Monday 4th May 2009
quotequote all
Unless im wrong...i was thinking velcro went round where it fits between targa bar and bootlid, and leading edge tape round inside of screen to match the rubber seal?

da_murphster

1,053 posts

276 months

Tuesday 5th May 2009
quotequote all
I have a problem with th erubber seal sticking to the window - to the extend where when I remove the screen the seal has stuck to it and pulled away from the car.

Will this tape help? Should I be 'greasing' up the edge of the screen or something?

NCE 61

2,457 posts

310 months

Tuesday 5th May 2009
quotequote all
Robertjp said:
Unless im wrong...i was thinking velcro went round where it fits between targa bar and bootlid, and leading edge tape round inside of screen to match the rubber seal?
No not on the seal side on the outside edge to prevent rubing on the fiberglass.

da_murphster said:
I have a problem with th erubber seal sticking to the window - to the extend where when I remove the screen the seal has stuck to it and pulled away from the car.

Will this tape help? Should I be 'greasing' up the edge of the screen or something?
I use a small ammount of silicon spray on all the seals including the rear window one, keeps them looking like new and prevents the problem you describe from happening.

graveltrap

2 posts

209 months

Wednesday 6th May 2009
quotequote all
S6 Devil, Had had a sqeaky rear window for 7 years until I bought a pair of rear window clips from Raceproved, the window seats much more securely now, and does not leak water anymore, money well spent.

mallybou

3 posts

204 months

Saturday 26th September 2009
quotequote all
S6 Devil said:
The rear screen is squeaking and driving me mad. I have the velcro along the top edge and have put silicon spray round the screen edge but still it squeaks. I had a look at mytuscan.co.uk and they suggest "Anti-squeak tape on the inside lip of the boot lid near the rear screen catches".

What is anti squeak tape!

Demon tweaks have all sorts of tape but nothing that specifies anti squeak. I know it's April the 1st but am I missing something?
Try this site http://www.hillcroftenterprises.com/page_124466366...
or thid site http://www.eazi-stops.com/anti_squeak_and_anti_rat...

mallybou

3 posts

204 months

Saturday 26th September 2009
quotequote all
NCE 61 said:
Anti squeak tape is listed as leading edge tape

Most of the 'squeaking' problem is from the contact point between the screen and the boot lid and adding the tape here can help.Although the best fix I have found is to replace the screen clips with the metal ones form CT and the stop this contact with the boot lid as the clips do not bend like the plastic ones.
Try this site http://www.eazi-stops.com/anti_squeak_and_anti_rat...

racer07

1 posts

201 months

Monday 7th December 2009
quotequote all
Hi There, i Can Reccommend the following company, they have a wide range of anti squeak and anti rattle tapes from felts to hard wearing polyurethanes. The Company is called eazi-stops. http://www.eazi-stops.com/.

Hope you find what your looking for!