It's an engine out job..

[washy]

Nice!!

[lawrence5]

See what you've been up to since Le Mans...... How long before she's back together ?

[joust]

[paulcundy]

obes said:

just the airjacks ......

and the electrical cutout and the rollcage and you're ready for racing!

Come on you know it makes sense.
Regards
Paul C

[obes]

Shhh, it's a secret

[paulcundy]

obes said:

Shhh, it's a secret

we need at least 3 cars on track to form a rolling blockade to keep that Steve bloke in his Exige at bay........

[chillidog]

--
Richard

[obes]

Thought i'd post an update !!

The turbo's are back from Turbo Technics with new bearings and seals..


and i've put some ducting from the front scoops to the brakes and up the tunnel.
(i'll sort something put for the Hvac ones I took out later !!)



The extinguisher's in too.


(modded the rails so Haze can reach the pedals while the seat's out !!!)

Made a couple of brackets to hold the Defi display and Control Unit



Nearly there !!

[rich 36]

looks good, what did you install extinguisher-wise

foam/powder/capacity

[mr noble]

Good work Obes!

Looks like you had a productive weekend!

Are you hoping to get the engine back before next weekend? 3 day install?

G

[obes]

rich 36 said:

looks good, what did you install extinguisher-wise

foam/powder/capacity

It's a lifeline 2.25ltr foam (electric)

[obes]

mr noble said:

Are you hoping to get the engine back before next weekend? 3 day install?

G

Am hoping mate

[gizard]

I was thinking of putting in an extinguisher - does anyone recon there might be enough room in front of the rear wheels inside the mud guard - either side?

[obes]

One of the 2.25 slimline's would go in upright I'd have thought

[oggs]

obes said:

Am hoping mate

[obes]

have roughed out the oil cooler install now too !

Edited by obes on Wednesday 30th August 23:28

[matt172]

obes said:

have roughed out the oil cooler install now too !

Edited by obes on Wednesday 30th August 23:28

looks better in the flesh

[joust]

You going to put a fan on the back of that? There is bugger all air flowing through that with M400 'sidepods' so I'd imagine next to naff all on a standard body?

J

[adrian w]

joust said:

You going to put a fan on the back of that? There is bugger all air flowing through that with M400 'sidepods' so I'd imagine next to naff all on a standard body?

J

Best you can do is two fans in front of the oil cooler, with the cooler in that position, Roush already do it and Trevor's got loads of data logging.

[joust]

adrian w said:

Best you can do is two fans in front of the oil cooler, with the cooler in that position, Roush already do it and Trevor's got loads of data logging.

Looks like it's flush against the air inlet to me, so surely the fans have to go on the 'back' of it?

J