|
Rob_W
Original Poster
842 posts
83 months
|
First off thanks to Daddysumo for doing all the hard work. (http://www.pistonheads.com/gassing/topic.asp?h=0&f=26&t=1031303&mid=65011&nmt=Replacement+Wheels.)
I thought there were enough lurkers/shirkers/ditherers to see if we could get another batch of Speedline wheels going.
Spoke to Chris @ Speedline and terms are pretty much as before;
We need 12 sets to get the full deal as before (£1250 a set delivered with all bits and bobs) 6 sets could be workable but price would need to be confirmed. All need to be the same colour. Noble centre caps could be catered for but again only if all agree (There's lots of info as to how the original look could be catered for without machining to suit). Delivery - probably 6 weeks minimum depends on castings and we are in busy season!
My preference would be for Gloss Black with Noble centre caps but Anthracite and standard Speedline caps OK
Think that's it for now.
Probably best to leave the thread for a few days to run to pick up interested parties.
Rob_W..............Gloss Black............Noble caps
Rob
|
|
|
Hollowpockets
4,765 posts
85 months
|
Rob_W..............Gloss Black............Noble caps Hollowpockets ... anthracite ... any caps
|
|
|
Dave2P
371 posts
49 months
|
Rob_W..............Gloss Black............Noble caps Hollowpockets ... anthracite ... any caps Dave2P ... Anthracite ... any caps
|
|
|
playalistic
1,528 posts
33 months
|
Rob_W - Gloss Black - Noble caps Hollowpockets - anthracite - any caps Dave2P - Anthracite - any caps playalistic - Anthracite - any caps
|
|
|
andrewr
287 posts
67 months
|
I wanted the Noble caps, but it couldn't be accomodated.
In the end I used the Speedline plastic centres and installed the Noble M400 stick on wheel decals. They are about 1mm smaller in diameter than the speedline silver decals. Look great. Noble M400 decals were £9.85 from the Late Peter Smiths.
Regards Andrew
|
Advertisement
|
|
|
Jamescmr2
700 posts
48 months
|
Rob_W - Gloss Black - Noble caps Hollowpockets - anthracite - any caps Dave2P - Anthracite - any caps playalistic - Anthracite - any caps jamescmr2 - Gloss black - any caps
|
|
|
Rob_W
Original Poster
842 posts
83 months
|
Thanks for the positive response so far and Chris has now confirmed a few more details; The price is £1,056.00 per set for 24F + 24R The price is £1,248.00 per set for 12F + 12R Prices include delivery, centres, bolts. Availability of castings is very good so lead times will be relatively short (circa 6 weeks) for all unless quantities become huge. I have chased a couple more people who had expressed interest before but just one set to go before it is a goer, would be nice to get to the higher figure and if people (previous or current prospects) want to buy a spare or two for the future then that would help to build the numbers. PS Can anybody understand why Tux would go for 600hp glued to the floor with fat heavy wheels, shall I put him down for 3 sets, road/trackday/race? 
|
|
|
mrpbailey
357 posts
55 months
|
Rob_W - Gloss Black - Noble caps Hollowpockets - anthracite - any caps Dave2P - Anthracite - any caps playalistic - Anthracite - any caps jamescmr2 - Gloss black - any caps mrpbailey - Anthracite - Noble caps
|
|
|
hoyin
987 posts
106 months
|
Any photos of the new wheels on some cars? Before I make a decision?
Thanks
|
|
|
daddysumo
2,422 posts
82 months
|
hoyin said: Any photos of the new wheels on some cars? Before I make a decision?
Thanks Plenty on the original thread !
|
|
|
Rob_W
Original Poster
842 posts
83 months
|
hoyin said: Any photos of the new wheels on some cars? Before I make a decision?
Thanks Have a look at the old thread, link above, for plenty of photos, they do look good (IMHO).
|
|
|
Blu3R
1,399 posts
68 months
|
Is it possible to have a set without the logo on the rim? I think that really spoils them.
|
|
|
shaunsmith
844 posts
86 months
|
|
|
Jamescmr2
700 posts
48 months
|
what tyres have people fitted in the end?
|
|
|
anotherdom
465 posts
37 months
|
I'm using the Federals, in standard sizes. Impressed so far, though they haven't really been pushed.
Dom.
|
|
|
andygtt
6,372 posts
133 months
|
I was hoping that the consensus would be black this time.... as Id happily swop my still boxed anthrecite ones for gloss black.
|
|
|
Rob_W
Original Poster
842 posts
83 months
|
andygtt said: I was hoping that the consensus would be black this time.... as Id happily swop my still boxed anthrecite ones for gloss black. Hi Andy I really hoped for black as with a grey car the anthracite gets a bit lost. We may get a couple more takers and if so I'll see if Speedline could be a bit more flexible. Rob
|
|
|
Blu3R
1,399 posts
68 months
|
shaunsmith said: Thanks Shaun, so do they peel off then or did you ask for a set without it printed on?
|
|
|
mdrc
360 posts
142 months
|
Rob_W - Gloss Black - Noble caps Hollowpockets - anthracite - any caps Dave2P - Anthracite - any caps playalistic - Anthracite - any caps jamescmr2 - Gloss black - any caps mrpbailey - Anthracite - Noble caps mdrc - Anthracite - not too worried which caps but prob Noble
|
|
|
shaunsmith
844 posts
86 months
|
Blu3R said: shaunsmith said: Thanks Shaun, so do they peel off then or did you ask for a set without it printed on? Rob All the sets were in Anthracite to keep costs down including mine, which all had the transrfers on, I had mine re done in powder coated gloss black & re laquered at a friends place but not putting the transfers on these, prefer without as did one wheel then removed immediately. Don't really suit on black wheels, the feint ones that was originally on looked ok though. Can't remember if transfers would peel off without damaging wheels, I think they were over laquered perhaps. Sumo or Granty would confirm. Class wheels. Shaun
|
|