|
Nosh
Original Poster
693 posts
36 months
|
So, the kit should be here tomorrow from Furniture Clinic - so I have broken the Driver seat in half, given it a clean (although you wouldn't really notice) and took some 'before' pics...    Ever wonder why your seat sags? Broken wires and the also the foam is cut (sliced) by those darn wires....   Will update the thread once I finish the job... Nosh
|
|
|
oily mist
52 posts
28 months
|
Look forward to seeing results + any tips you have. Planning the same for my chairs (as soon as I've finished putting the MG back together).
Did you send off a sample of leather for colour match or have you gone for 'TVR magnolia'?
|
|
|
Nosh
Original Poster
693 posts
36 months
|
oily mist said: Did you send off a sample of leather for colour match or have you gone for 'TVR magnolia'? I did - costs an extra £10 for the colour match.... Nosh
|
|
|
paulskel
75 posts
16 months
|
Looking forward to seeing the pictures of the seat refurbed :-)
|
|
|
sweeper
291 posts
29 months
|
Let us know also which goods you use from FC to repair your seats please
Cheers.
|
Advertisement
|
|
|
graeme4130
834 posts
50 months
|
I think there's a fair few of us in need of doing something the same in terms of refurb of our seats, so I'd be really interested to see the results and to understand how hard it was to apply and some costs
Keep us posted if poss please
Cheers
Graeme
|
|
|
Podie
38,370 posts
144 months
|
graeme4130 said: I think there's a fair few of us in need of doing something the same in terms of refurb of our seats, so I'd be really interested to see the results and to understand how hard it was to apply and some costs
Keep us posted if poss please
Cheers
Graeme 
|
|
|
SSPPGG
1,101 posts
71 months
|
my trimmer put some 1 1/2 inch wide webbing front to back, and side to side, and deleted the cheese wire thing. also used some firmer blue foam in the middle part of the squab.
used some bent wire as a frame to to clip the seat squab trim clips to. once the wire stuff was removed.
worked perfect, and only cost a few quid
|
|
|
SSPPGG
1,101 posts
71 months
|
my trimmer put some 1 1/2 inch wide webbing front to back, and side to side, and deleted the cheese wire thing. also used some firmer blue foam in the middle part of the squab.
used some bent wire as a frame to to clip the seat squab trim clips to. once the wire stuff was removed.
worked perfect, and only cost a few quid
|
|
|
Nosh
Original Poster
693 posts
36 months
|
SSPPGG said: my trimmer put some 1 1/2 inch wide webbing front to back, and side to side, and deleted the cheese wire thing. also used some firmer blue foam in the middle part of the squab.
used some bent wire as a frame to to clip the seat squab trim clips to. once the wire stuff was removed.
worked perfect, and only cost a few quid What was the webbing made out of? Nosh
|
|
|
seeby
610 posts
39 months
|
I used F/C kit a few weeks ago. I could,nt get ot with the poxy little airbrush that came with it.I ended up applying 4 colour coats & 4 sealer coats with the sponge instead. I,m really pleased with the finish ,but if your going to spray, I would suggest hiring one of their compressors.My seats were in about the same condition as your pictured ones.
|
|
|
Nosh
Original Poster
693 posts
36 months
|
Quick update - here are some pics, and I am just waiting for the final colour coat, I just sprayed, to dry. No probs with the airbrush - during each drying session, I put the propellant can in a saucepan of warm water - no issues with spluttering etc... A very nice result - see for yourself...    Nosh
|
|
|
paulskel
75 posts
16 months
|
Very nice great result, so will you pop over here to Sweden and do my seats please :-)
|
|
|
Podie
38,370 posts
144 months
|
|
|
graeme4130
834 posts
50 months
|
Wow, that is an incredible transformation
If you don't mind me asking, how much does the kit cost ?
|
|
|
Nosh
Original Poster
693 posts
36 months
|
graeme4130 said: Wow, that is an incredible transformation
If you don't mind me asking, how much does the kit cost ? £55 for the kit (included the paint match , which was absolutley spot on) £6.95 for the postage, which arrived the next day. So, £61.95 in total. I have also noticed that the final coat (satin) looks too 'dull' - in comparison with the 'arse on' half of the seat, which looks gloss, rather than satin. I may put a gloss coat on top of the back bit, but will wait till after I have done the 'arse' bit, which I am tackling today. Nosh.
|
|
|
cavebloke
342 posts
96 months
|
|
|
SILICONEKID340HP
8,366 posts
100 months
|
Nosh said: graeme4130 said: Wow, that is an incredible transformation
If you don't mind me asking, how much does the kit cost ? £55 for the kit (included the paint match , which was absolutley spot on) £6.95 for the postage, which arrived the next day. So, £61.95 in total. I have also noticed that the final coat (satin) looks too 'dull' - in comparison with the 'arse on' half of the seat, which looks gloss, rather than satin. I may put a gloss coat on top of the back bit, but will wait till after I have done the 'arse' bit, which I am tackling today. Nosh. Will it do the vinyl centre consol doors bits and can you get a type of filler for small niks ,cuts etc.Will that kit do both seats and the vinyl bits.
|
|
|
brett84
472 posts
22 months
|
That looks fantastic, good work.
I'm going to be going from Black -> Cream in the near future, this has giving me some inspiration to get on with it
|
|
|
Nosh
Original Poster
693 posts
36 months
|
This is the finished article..........  ..........I also done a vid (yes, Alex - for you!!) explaining how I modded underneath the seat to get rid of the sagging... Mod VideoHope you find this useful.. Nosh
|
|
