|
pulsarboby
Original Poster
210 posts
23 months
|
just bought a pair of these bad boys to fit on the cerb should hopefully give it a much nicer deeper tone. gonna fit them in place of the decat pipes after a bit of modding, just casnt stand the racket any longer lol  £90 the pair brand new, and theyll make them to whatever size you wish  ....anyone else fitted the cherrybombs?
|
|
|
scotty_d
5,634 posts
63 months
|
What about that nice Turbo sitting there is it going in next. 
|
|
|
pulsarboby
Original Poster
210 posts
23 months
|
haha no thats for the pulsar all freshly delivered today!
|
|
|
ShiDevil
1,198 posts
43 months
|
One of those sausages or cheeses in the orange wrapper?
|
|
|
FarmyardPants
2,238 posts
87 months
|
ShiDevil said: One of those sausages or cheeses in the orange wrapper? Lol yea looks like a giant smoked Hungarian cheese  Decat shouldn't be too loud (especially linked) with a back box - decat and sports tails = bleeding ears. The SP system sounds fab IMO
|
Advertisement
|
|
|
Mr Cerbera
2,934 posts
99 months
|
Will be very interested in how you roll those ends to make Male/Female mating surfaces  p.s. Perforated Eardrums are recoverable 
ETAJust remember where I'd seen those before. My first Mrs. bought one that was mains operated....
|
|
|
pulsarboby
Original Poster
210 posts
23 months
|
Mr Cerbera said: Will be very interested in how you roll those ends to make Male/Female mating surfaces p.s. Perforated Eardrums are recoverable
ETAJust remember where I'd seen those before. My first Mrs. bought one that was mains operated.... the decats (already fitted) will have ends cut off and il slip the pipe inside these with the rolled part already there from decat. then just weld the pipe to cherrybombs. not seen a mains operated one only rechargable cordless 
|
|
|
Mr Cerbera
2,934 posts
99 months
|
pulsarboby said: .... and il slip the pipe inside these with the rolled part already there from decat. then just weld the pipe to cherrybombs. not seen a mains operated one only rechargable cordless Ooh, are they the same diameter ?? - Lucky Boy !! Can you Vid the exhaust after it's all refitted and post it - Would be very interested to hear what it sounds like  (Don't you remember when the entire Midlands was left without a single volt between them ??)
|
|
|
pulsarboby
Original Poster
210 posts
23 months
|
yeah il have car in workshop next week so will take a before and after vid of how these sound once fitted. ordered 2i/4' id silencers so pipes from existing should in theory slot inside these.
gotta say ive never heard a cerb as loud as this one, bloody things deafening especially on motorway
|
|
|
Mr Cerbera
2,934 posts
99 months
|
Turn the Stereo up !!
|
|
|
sweeper
291 posts
29 months
|
|
|
pulsarboby
Original Poster
210 posts
23 months
|
lumps of cheese now installed;) what a difference, cars now sounding very nice, not quiet but just a real nice deep tone to it and you can hear yourself think on a runout if anyone else is thinking of getting these then highly recommended and cheap as chips too 
|
|
|
Mr Cerbera
2,934 posts
99 months
|
I have to say that they look coooooool too ! Nice Job ! ( Still waiting for Vid )
|
|
|
Mr Cerbera
2,934 posts
99 months
|
I have to say that they look coooooool too ! Nice Job ! ( Still waiting for Vid )
|
|
|
Gazzab
15,109 posts
151 months
|
How does it drive? Not robbed any power or throttle response?
|
|
|
vroom
577 posts
153 months
|
Any photo's of them with the flanges welded on?
It looks like you've sleeved on one end but not the other..
Looks good and I'm interested too
|
|
|
pulsarboby
Original Poster
210 posts
23 months
|
yep il put a vi up a little later this week but it doesnt really tell you a lot at idle but youll get the gist of it.
im still running the nw engine in at the moment so dont want to open her up past 4k, its only done 400 miles lol
but have to say that throttle response low down has improved, much more responsive and generally easier to drive in traffic.
when you look at the decat pipes they are a fairly small bore but with the 4'' cherry bombs fitted the id of the pipe has opened so maybe this is allowing better breahing without compromising back pressure.
ive also noticed that temps in the cockpit have decreased significantly due to the thicker wall of the cherry bombs compared to the thin allie decats.
il report back on power once ive run her in and got some fully synthetic oil in her
|
|
|
pulsarboby
Original Poster
210 posts
23 months
|
vroom said: Any photo's of them with the flanges welded on?
It looks like you've sleeved on one end but not the other..
Looks good and I'm interested too no sorry didnt take any but basically i cut the flange off one end of the decat then slipped it inside the new silencer then welded it on with the clamp plate. the other end i could have done the ame with but decided to sleeve it instead due to the fact that i ordered 18'' overall lengh bombs but they sent me 18'' body (2ft overall) and i couldnt be assed sending them back, otherwise you could have made them exactly the same size as decats
|
|
|
PoleDriver
20,228 posts
63 months
|
Where did you get them from?
|
|
|
pulsarboby
Original Poster
210 posts
23 months
|
here you go fella http://www.ebay.co.uk/itm/CHERRY-BOMB-TM-EXHAUST-1...give them a bell as they will make them to whatever size you wish. ideally you want 18'' overall lengh, then you can weld flanges to both ends and it then becomes a bolt on/off item. whole lot will be less than a oner delivered (and no im nothing to do with company thats flogging them lol) forgot to put the link 
|
|
