Dash Knobs - How to remove??
Discussion
Quick one,
My fog light knob is loose and keeps spinning, i thought about taking it off to maybe then seal it back on again... but it wont simply pull off for some reason... any ideas? I don't want to pull too hard in case there is a mysterious TVR way of holding it on that i dont know about... ;-)
Rich
My fog light knob is loose and keeps spinning, i thought about taking it off to maybe then seal it back on again... but it wont simply pull off for some reason... any ideas? I don't want to pull too hard in case there is a mysterious TVR way of holding it on that i dont know about... ;-)
Rich
I agree, these rotary knobs should push out from behind but shouldn't suffer if you pull them from the front at the same time to encourage them. There is probably some kind of upholstery glue bonding the switch to the vinyl/leather in addition to friction of the hole itself. They are a hard-plastic one piece unit which is pretty tough - I prised one apart when my trim was in pieces and it took some effort. They are rare as hens teeth if you need a new one though so be careful not to damage any of the 3 x spade connectors on the back.
Dave
Dave
Whatever you do, do not damage the knob! It is possible to get other rotary switches (Car Builder Solutions provided one for me) which can be fitted with home made adaptors/mountings to fit the dash holes but you need the knob to fix on the front to hide the disguise what you have done. There is no sign that the heater switch in mine is not original.
Gassing Station | S Series | Top of Page | What's New | My Stuff