Front Upper Wishbone
Discussion
So, the re-build has begun.
I've been pondering on the arrangement of the washers, spacers, etc... on the front upper wishbone. While searching, I found this thread:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
That has helped with the arrangement (I had misplaced the top hat spacers) but it strikes me that the plastic washer/spacer, closest to the chassis isn't needed. Is that correct, especially as it would need to be cut down to fit anyway??
M
I've been pondering on the arrangement of the washers, spacers, etc... on the front upper wishbone. While searching, I found this thread:
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
That has helped with the arrangement (I had misplaced the top hat spacers) but it strikes me that the plastic washer/spacer, closest to the chassis isn't needed. Is that correct, especially as it would need to be cut down to fit anyway??
M
Did you source the washers etc. sorry for not getting back to you about them. Can still stick them in the post? I followed the drawings of the suspension set up
http://tvrcerbera.co.uk/Gallery/displayimage.php?p...
But even the fitting together of it all isn't that straight forward and doesn't make sense.
http://tvrcerbera.co.uk/Gallery/displayimage.php?p...
But even the fitting together of it all isn't that straight forward and doesn't make sense.
pmessling said:
Did you source the washers etc. sorry for not getting back to you about them. Can still stick them in the post? I followed the drawings of the suspension set up
http://tvrcerbera.co.uk/Gallery/displayimage.php?p...
But even the fitting together of it all isn't that straight forward and doesn't make sense.
No worries, I got a couple of packs with the bolts I ordered. http://tvrcerbera.co.uk/Gallery/displayimage.php?p...
But even the fitting together of it all isn't that straight forward and doesn't make sense.
Yeah, I've followed the pics there, it fits and even sort of makes sense... Apart from that plastic spacer/washer closest to the chassis???
M
OK... The plot thickens.
I ordered in some new top-hat spacers but I'm not sure if they have sent the correct sizes??? Are the 2x top-hat spacers, you fit either side of the bush, supposed to be the same size or are you supposed to have 2x different sizes per bush??
Originally, mine had the 2x top-hats of the same size fitted but I'm not 100% sure it was set up correctly as it was a bit 'bodged' in places!! However, ISTR reading somewhere that the V8s have both top-hats the same size where as the Speed6 has a larger spacer on the side closest to the chassis.
Can anyone confirm?
To further confuse matters, these links show the same part (C0410) but if you look at the images, they're both different???
http://willowsportscars.co.uk/tvr_cerbera_parts.ht...
http://www.thetvrshop.com/TVR/Parts_details/TVR%20...
Confused??? You will be...
M
I ordered in some new top-hat spacers but I'm not sure if they have sent the correct sizes??? Are the 2x top-hat spacers, you fit either side of the bush, supposed to be the same size or are you supposed to have 2x different sizes per bush??
Originally, mine had the 2x top-hats of the same size fitted but I'm not 100% sure it was set up correctly as it was a bit 'bodged' in places!! However, ISTR reading somewhere that the V8s have both top-hats the same size where as the Speed6 has a larger spacer on the side closest to the chassis.
Can anyone confirm?
To further confuse matters, these links show the same part (C0410) but if you look at the images, they're both different???
http://willowsportscars.co.uk/tvr_cerbera_parts.ht...
http://www.thetvrshop.com/TVR/Parts_details/TVR%20...
Confused??? You will be...
M
Gassing Station | Cerbera | Top of Page | What's New | My Stuff