2008 mazda 6 rough idle
Discussion
My 2008 mazda 6 2.0d is idling a bit rough. Drives ok. No loss of power.
Plugged in a cheap scanner and it says 32 pending codes and 32 live codes. Plug it in an hour later and it only brings up the pending codes, so I am not convinced of its accuracy.
Idle doesnt vary alot, just enough to notice. Around 715 - 750 ish.
Replaced maf, no difference.
Noticed a hose at the back a bit loose so tightened it up. No difference. Think it was a breather hose as it had some oil coming out of it, which is how i noticed it.
Any ideas?
Thanks
Plugged in a cheap scanner and it says 32 pending codes and 32 live codes. Plug it in an hour later and it only brings up the pending codes, so I am not convinced of its accuracy.
Idle doesnt vary alot, just enough to notice. Around 715 - 750 ish.
Replaced maf, no difference.
Noticed a hose at the back a bit loose so tightened it up. No difference. Think it was a breather hose as it had some oil coming out of it, which is how i noticed it.
Any ideas?
Thanks
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff