ABS light staying on. on my pug 06 GTI

[steve1976]

HI my ABS light is staying on my Peugeot 106 GTI any suggestions would be grate I have clean the sensors and the light is still on so I have not got a clue is there anything I have missed any info would be super thanks everyone

[MG CHRIS]

Get the codes read to see where the problem is. Most likely an abs sensor oh and 99% of time cleaning the sensor wont do anything normally a break in the wiring.

[horza]

The hub is magnetised to send the info to the sensor.

No experience with Pugs but generally, if it's not the sensor, it's the hub carrier. Probably £35 from a motor factor.

I'd try a new sensor first. A friendly mechanic could try a sensor from the other side of the car to see if it's either sensor or hub.

[slipstream 1985]

i broke my abs by braking to hard in my xsara vts. Tbh it was better without it. The light was stuck on after that too.

[kambites]

slipstream 1985 said:

i broke my abs by braking to hard in my xsara vts. Tbh it was better without it. The light was stuck on after that too.

I think it's an MoT failure these days.