Discussion
Following breakdown of the exhaust manifold heat shielding on the inner wings (and a frazzled footwell carpet), I tried Agriemach self adhesive Thermo Tech tape. This lasted 3k miles, but is now peeling off (the tape is fine - it's the adhesive that can't take the temps). Any such thing as a (very) high temp adhesive ? Or any other ideas to avoid removing manifolds and re-riveting?
Thanks in advance.
Thanks in advance.
I've had the same issue. Offord reckoned they could rivet some new heat shielding down there with little trouble. (The existing stuff is riveted in place, at least at the corners)
I stopped it happening again with a lower temp otter switch which seems to prevent the car getting *quite* as hot as it did.
I stopped it happening again with a lower temp otter switch which seems to prevent the car getting *quite* as hot as it did.
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff