Power steering fluid return tubing
Discussion
Hi All,
I want to replace the tubing for my power steering as above - it's not the high pressure side, just the low pressure return side.
I'm a little confused as to what material I should be using - is PS fluid particularly corrosive?
I can't just buy a direct replacement as it's for my 205 gti6, and I've relocated the PS reservoir and the reason I want some new tubing is that I'm not happy with the routing using the 'standard' 306 return pipe, so I need some generic stuff.
Demon Tweeks isn't very helpful - what are fit car guys using, for example?
Cheers,
Adam.
I want to replace the tubing for my power steering as above - it's not the high pressure side, just the low pressure return side.
I'm a little confused as to what material I should be using - is PS fluid particularly corrosive?
I can't just buy a direct replacement as it's for my 205 gti6, and I've relocated the PS reservoir and the reason I want some new tubing is that I'm not happy with the routing using the 'standard' 306 return pipe, so I need some generic stuff.
Demon Tweeks isn't very helpful - what are fit car guys using, for example?
Cheers,
Adam.
stevieturbo said:
Well you arent being very specific.
Flexible, rigid ? what fittings ? Push on ? other ?
ATF is more or less just an oil, so any suitable oil/fuel hose would do.
Available at any motor factors or anywhere that sells hoses really.
Flexable, 18mm i guess (I'd have to measure to be specific) push on. Will get in contact with some hydraulic suppliers.Flexible, rigid ? what fittings ? Push on ? other ?
ATF is more or less just an oil, so any suitable oil/fuel hose would do.
Available at any motor factors or anywhere that sells hoses really.
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff