The results are in.

The results are in.

Author
Discussion

macdeb

Original Poster:

8,493 posts

254 months

Saturday 12th April 2014
quotequote all
Guys, for those who've been following, I had the car mapped today and the results are;

458 BHP
554 LB FT torque

bouncebouncebounce

Big thanks to;
Eann Whalley and his superb kit
Dale at 'Bailey Performance' Telford [top bloke] for mapping, problem solving, patience.
Neal1980 for unwavering support and help.
thumbup

PS; the dyno used was previously reading 260 for my old n/a motor when others had it at 285 wink

Edited by macdeb on Saturday 12th April 22:49


Edited by macdeb on Saturday 12th April 23:03


Edited by macdeb on Wednesday 16th April 12:26

Pupp

12,206 posts

271 months

Saturday 12th April 2014
quotequote all
Post up the curves Mac! smile

Best get some driveshafts on order!! hehe

Do you know what boost it made?

Edited by Pupp on Saturday 12th April 22:56

macdeb

Original Poster:

8,493 posts

254 months

Saturday 12th April 2014
quotequote all
Pupp said:
Post up the curves Mac! smile

Best get some driveshafts on order!! hehe

Do you know what boost it made?

Edited by Pupp on Saturday 12th April 22:56
Will do. It was at 1 bar. It's unreal, yet drives very nicely off boost too.

Edited by macdeb on Saturday 12th April 23:05

brett84

1,291 posts

152 months

Saturday 12th April 2014
quotequote all
Thats going to be a handful smile
I bet you were over the moon with that

macdeb

Original Poster:

8,493 posts

254 months

Saturday 12th April 2014
quotequote all
brett84 said:
Thats going to be a handful smile
I bet you were over the moon with that
yes not 'arf.

Pupp

12,206 posts

271 months

Saturday 12th April 2014
quotequote all
Crikey, big cojones whacking it straight up to 1 Bar bow

Glad it's turned out good mate smile

macdeb

Original Poster:

8,493 posts

254 months

Saturday 12th April 2014
quotequote all
Cheers bloke, started at 6 and built up. Though I may have some work to do yet, but,,,,

Edited by macdeb on Saturday 12th April 23:26

Pupp

12,206 posts

271 months

Saturday 12th April 2014
quotequote all
macdeb said:
started at 6...
6 Bar!? eek

hehe

fatboychim

976 posts

250 months

Sunday 13th April 2014
quotequote all
Holy crap that's big numbers, excellent work. Have fun with it

Hoofa

3,151 posts

207 months

Sunday 13th April 2014
quotequote all
Nice numbers smile

Now you are going to need , r888 tyres , I hope your gearbox has been done,

Enjoy it and look forward to seeing it , but as always it's the getting the power down which is now the challenge


db484bhpv8

8,655 posts

219 months

Sunday 13th April 2014
quotequote all
smokin

made up for you Mac.
Soon to be running easy 11's.
The driveshafts should hold out ok on road rubber but if you are wanting decent grip for the strip then you have plenty of torque to snap a racefailed shaft never mind a standard one.
Like Nigel says, gonna be a handful on boost. Be careful out there.

ackbullchang

270 posts

209 months

Sunday 13th April 2014
quotequote all
Congratulations Mac, figures look good, are you going to post the graphs?

ChilliWhizz

11,990 posts

160 months

Sunday 13th April 2014
quotequote all
Awesome Mac biggrin

Very pleased for you, and not at all jealous. Not at all.








Not even a tiny bit.








Nope, no jealousy here.







whistle

caduceus

6,069 posts

265 months

Sunday 13th April 2014
quotequote all
Any video clips? smile

CHIMV8

2,768 posts

220 months

Sunday 13th April 2014
quotequote all
macdeb said:
Guys, for those who've been following, I had the car mapped today and the results are;

458 BHP
554 LB FT torque

bouncebouncebounce

Big thanks to;
Eann Whalley and his superb kit
Dale at 'Bailey Motorsport' Telford [top bloke] for mapping, problem solving, patience.
Neal1980 for unwavering support and help.
thumbup

PS; the dyno used was previously reading 260 for my old n/a motor when others had it at 285 wink

Edited by macdeb on Saturday 12th April 22:49


Edited by macdeb on Saturday 12th April 23:03
HOW MANY HORSES UNDER THE BONNETTyikesyikeswoohoowoohoo

Robert Lees

550 posts

140 months

Sunday 13th April 2014
quotequote all
430+ bhp/ tonne ahahahahahah..... Nutter!

Love it !


LongBaz383BHP

2,087 posts

216 months

Sunday 13th April 2014
quotequote all
Brilliant results.

marceli

98 posts

133 months

Sunday 13th April 2014
quotequote all
Great setting! What's inside? Garrett/rotex?

phazed

21,844 posts

203 months

Sunday 13th April 2014
quotequote all
Really great results Mac.

Bet you're glad you kept it now!

Look forward to seeing it on the strip.

Can you be tempted to do a TD?

carsy

3,018 posts

164 months

Sunday 13th April 2014
quotequote all
Awesome, great figures Mac. thumbup