wheel spacersSN95, anyone got them?

wheel spacersSN95, anyone got them?

Author
Discussion

fourpointsixgt

Original Poster:

513 posts

164 months

Thursday 1st May 2014
quotequote all
Been thinking about fitting these to maybe improve the tucked in look which is common on these, my '02 has got 255s on the original Bullitt alloys at the rear, which is 10mm wider than standard, but still well inside the arches. Decent Eibach or H&R hubcentric ones on US websites are about £100-£160 + post per pair. Anyone recommend a good uk supplier, tried a few but no joy, also thickness wise, I was thinking 25 or 35mm. Thanks

Fartgalen

6,636 posts

207 months

Thursday 1st May 2014
quotequote all
I had 25mm spacers - the bolt on type - on a previous Sn95. Helped with the pushed-in look and improved stability markedly on the back.

beebs90

169 posts

183 months

Friday 23rd May 2014
quotequote all
I got some cheap 1.5 inch ones off ebay US, not hub-centric or anything had no problems with them at all. Im running the same wheel and tyre set-up on my Bullitt.

TIS

219 posts

197 months

Sunday 25th May 2014
quotequote all
North Hants Tyres 01252 318666 sell the 1 1/4" spacers with stud extensions for £39+VAT a pair (non hub centric).