Semisober/insomnia eBay purchase.
Discussion
So I have a bit of history with MX5/Eunos's...
...I took the black Eunos as a 500 part exchange when I sold my 200SX powered MGB GT.
The photo was after a six hour valet and I used the car that Summer and sold her on for 1200.
I've been messing about with front wheel drive stuff for a while but have missed driving something that wasn't a compromise.
My neighbor has a rusty old MX5 for sale in his garden that's been off the road since 2010 for 500. I was interested but thought it was way too much money. One night I was poking about on eBay and a combination of a lack of sleep and Jack Daniels meant I bid on this...
http://www.ebay.co.uk/itm/400706268811?ssPageName=...
...and won.
Hmmmm...
Okay first impressions were "meh" at best. Some knob jockey had pulled the number plate off and stolen the front badge.
The M.O.T ran out May 15th apparently I could see the car needs tyres and a bit of welding on the sills "no big deal" I thought but going through the paperwork the car failed an M.O.T on the 6th.
Let's get the car cleaned and see what else is wrong with the old girl.
1/ The drivers seat is trash.
2/ the front bumper and drivers side wing are different colours to the rest of the car.
3/ Both rear arches have been repaired badly (by body shop standards or semi-okay for a driveway mechanic) and are the same rattle can paint as the front bumper.
4/ The rattle can paint job had not been masked off properly and there's overspray and tape marks over the back bumper and tail panel.
5/ The roll over hoop gets in the way if I have the sat back enough for my six foot two self.
Apart from that...
...she's a bloody nice car.
So I was having ideas...
http://www.ebay.co.uk/itm/Tribute-Automotive-MX250...
...and...
https://www.youtube.com/watch?v=O6I3xJuY9i8
...how hard could it be?
http://www.ebay.co.uk/itm/Lexus-ls400-engine-4-0l-...
But I started with something easy.
Will my Alfa 147 seats that are in my shed address the garbage drivers seat issue?
Nope, but it was an opportunity to clean at least three different kinds of beetle from the floor.
Next to go was the hoop...
...so at least I can sit in the thing without banging the back of my head.
...I took the black Eunos as a 500 part exchange when I sold my 200SX powered MGB GT.
The photo was after a six hour valet and I used the car that Summer and sold her on for 1200.
I've been messing about with front wheel drive stuff for a while but have missed driving something that wasn't a compromise.
My neighbor has a rusty old MX5 for sale in his garden that's been off the road since 2010 for 500. I was interested but thought it was way too much money. One night I was poking about on eBay and a combination of a lack of sleep and Jack Daniels meant I bid on this...
http://www.ebay.co.uk/itm/400706268811?ssPageName=...
...and won.
Hmmmm...
Okay first impressions were "meh" at best. Some knob jockey had pulled the number plate off and stolen the front badge.
The M.O.T ran out May 15th apparently I could see the car needs tyres and a bit of welding on the sills "no big deal" I thought but going through the paperwork the car failed an M.O.T on the 6th.
Fail Sheet said:
001 Nearside rear Registration plate lamp not illuminating the registration plate.
002 Nearside rear Registration plate lamp not working.
003 Front Tyre has a cut in excess of the requirements deep enough to reach the ply or chords.
004 Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or chords.
005 Offside front (chassis) Suspension component mounting prescribed area is excessively corroded.
006 Nearside rear (outer sill) Seat belt anchorage prescribed area is excessively corroded.
002 Nearside rear Registration plate lamp not working.
003 Front Tyre has a cut in excess of the requirements deep enough to reach the ply or chords.
004 Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or chords.
005 Offside front (chassis) Suspension component mounting prescribed area is excessively corroded.
006 Nearside rear (outer sill) Seat belt anchorage prescribed area is excessively corroded.
Advisories said:
007 Front brake pad(s) wearing thin.
008 Nearside front suspension arm rubber bush deteriorated but not resulting in excessive movement.
A little worse than expected but salvageable. 008 Nearside front suspension arm rubber bush deteriorated but not resulting in excessive movement.
Let's get the car cleaned and see what else is wrong with the old girl.
1/ The drivers seat is trash.
2/ the front bumper and drivers side wing are different colours to the rest of the car.
3/ Both rear arches have been repaired badly (by body shop standards or semi-okay for a driveway mechanic) and are the same rattle can paint as the front bumper.
4/ The rattle can paint job had not been masked off properly and there's overspray and tape marks over the back bumper and tail panel.
5/ The roll over hoop gets in the way if I have the sat back enough for my six foot two self.
Apart from that...
...she's a bloody nice car.
So I was having ideas...
http://www.ebay.co.uk/itm/Tribute-Automotive-MX250...
...and...
https://www.youtube.com/watch?v=O6I3xJuY9i8
...how hard could it be?
http://www.ebay.co.uk/itm/Lexus-ls400-engine-4-0l-...
But I started with something easy.
Will my Alfa 147 seats that are in my shed address the garbage drivers seat issue?
Nope, but it was an opportunity to clean at least three different kinds of beetle from the floor.
Next to go was the hoop...
...so at least I can sit in the thing without banging the back of my head.
Edited by Liquid Knight on Friday 23 May 18:14
MX-5 Lazza said:
Where are you LK?
I have a pair of tyres you could have cheap if you can pick up from Wokingham.
I also have a pair of Mk2.5 seats but probably a fair bit more expensive than you'd want to pay.
Thanks. I have acquired a set of tyres in exchange for welding up an old Nissan Micra floor. I have a pair of tyres you could have cheap if you can pick up from Wokingham.
I also have a pair of Mk2.5 seats but probably a fair bit more expensive than you'd want to pay.
I have a cunning plan for bum holders.
As the car needs a respray. How do we feel about this colour?
http://www.ebay.co.uk/itm/370574192267?ssPageName=...
Deep custom look without being too mush and I don't have to tell the DVLA as technically it's red.
http://www.ebay.co.uk/itm/370574192267?ssPageName=...
Deep custom look without being too mush and I don't have to tell the DVLA as technically it's red.
Liquid Knight said:
Someone at work said:
Can you fit a folding hard top from a newer model? That would be cool.
It would be possible I guess but it would add more weight to a not exactly light car. Flying Toilet said:
Thought you were on Power Tour?
That was the plan and I bought the Punto especially for the event but it turns out my employers require more than six months notice to arrange cover so I can have a weekend off. 
I would have had a decent chance of taking day one as well.
Liquid Knight said:
Flying Toilet said:
Thought you were on Power Tour?
That was the plan and I bought the Punto especially for the event but it turns out my employers require more than six months notice to arrange cover so I can have a weekend off. I would have had a decent chance of taking day one as well.
Always next year.
Flying Toilet said:
Ah ok, I thought you were worried about an oil leak not holiday.
Always next year.
That turned out to be my pain in the arse sister leaving her Corsa in my space while I was at work. Always next year.
Two hours looking for a non-existent leak.
I did a bit of photoshopping at work last night. Dark red and filled in the reflector and side repeater holes.
I think the car looks a little like a C4 Corvette if you squint.
Just need to leave a few things here for future reference...
http://www.ebay.co.uk/itm/121315848491?ssPageName=...
http://www.ebay.co.uk/itm/400023412828?ssPageName=...
http://www.ebay.co.uk/itm/400221810984?ssPageName=...
http://www.ebay.co.uk/itm/121315848491?ssPageName=...
http://www.ebay.co.uk/itm/400023412828?ssPageName=...
http://www.ebay.co.uk/itm/400221810984?ssPageName=...
http://www.ebay.co.uk/itm/Mazda-RX-8-RX8-192-231-P...
Has anyone put RX8 seats into an MX5 yet?
These would look nice against the red paintwork.
Has anyone put RX8 seats into an MX5 yet?
These would look nice against the red paintwork.
Liquid Knight said:
http://www.ebay.co.uk/itm/Mazda-RX-8-RX8-192-231-P...
Has anyone put RX8 seats into an MX5 yet?
These would look nice against the red paintwork.
Yes it has been done. They are quite big though and look chunky in an MX5.Has anyone put RX8 seats into an MX5 yet?
These would look nice against the red paintwork.
MX-5 Lazza said:
Liquid Knight said:
http://www.ebay.co.uk/itm/Mazda-RX-8-RX8-192-231-P...
Has anyone put RX8 seats into an MX5 yet?
These would look nice against the red paintwork.
Yes it has been done. They are quite big though and look chunky in an MX5.Has anyone put RX8 seats into an MX5 yet?
These would look nice against the red paintwork.
Looks worse than the Kirkey. I doubt I'd be able to drive it let alone sell it to someone over five foot six.
Inside I mean. Any seat that fits a Mk2 will fit a Mk1 because the chassis is basically the same. All MX5 Mk1/2/2.5 seats can be swapped between cars. Late Mk2.5 seats will bolt straight into an early Mk1. The seat belt stalk might need a bit a bit of work though.
My Mk2.5 has had Elise S1 & S2 seats and now has MX5 Mk3 seats.
My Mk2.5 has had Elise S1 & S2 seats and now has MX5 Mk3 seats.
So I thought I'd have a look at the front hole today...
...doesn't look too bad...
...a quick folded plate lap welded in place.
Well as I have all the gear out I might as well take a look at the back.
Hmmmm...
Under the roughed up paint was a quarter of an inch of filler and a poorly pigeon poo welded plat that had rusted through because it was welded over the top of the old sill. I was that annoyed I forgot to photograph it.
Cut it all out and thought I can wait until Payday to buy the new end section...
...right?
Nope...
...safe to say I got a little carried away (yes it was dark by the time I had got to that point).
Mazda truly have made a car inspired by European Sports cars...
...doesn't look too bad...
...a quick folded plate lap welded in place.
Well as I have all the gear out I might as well take a look at the back.
Hmmmm...
Under the roughed up paint was a quarter of an inch of filler and a poorly pigeon poo welded plat that had rusted through because it was welded over the top of the old sill. I was that annoyed I forgot to photograph it.
Cut it all out and thought I can wait until Payday to buy the new end section...
...right?
Nope...
...safe to say I got a little carried away (yes it was dark by the time I had got to that point).
Mazda truly have made a car inspired by European Sports cars...
So now I'm thinking sale potential.
If the Panda deal falls through and I M.O.T the car.
How about matte red for the body and in typical J-Tuner style this...
...or this...
...on the bonnet with a few chavy stickers to sell the car to a mug?
Obviously with "Dub Scene" and "Drift" in the advert so it sells for three times what the car's worth.
If the Panda deal falls through and I M.O.T the car.
How about matte red for the body and in typical J-Tuner style this...
...or this...
...on the bonnet with a few chavy stickers to sell the car to a mug?
Obviously with "Dub Scene" and "Drift" in the advert so it sells for three times what the car's worth.
Gassing Station | Mazda MX5/Roadster/Miata | Top of Page | What's New | My Stuff