Testing 2.0 tfsi coilpacks

[liner33]

Just swapped a set of coils for a mate on his KTM Xbow which uses the 2.0 VAG engine with its predisposition for eating coilpacks.

I do have VCDS but the ecu on these is very much a stripped down version and although the misfire was happening every time the car was on boost and under load , no fault codes were recorded nor misfire "events" on the ecu

Is there a resistance test that can be done on the coilpacks when off the car? Pretty sure which one was causing the problems but would like to confirm and avoid binning 3 working coilpacks if possible