Hi CO reading..
Discussion
Jhonno said:
Idle 1.9 irrc HC's were 500
Fast idle it dipped under 0.2 but wouldn't stay, HC's were 50.
Have you got the diagnostic software and lead? Its over-fuelling at idle so I'd be looking at the water temp sensor, the air temp sensor, then the readings from the lambda sensors and throttle pots. Fast idle it dipped under 0.2 but wouldn't stay, HC's were 50.
As it seems to get better at 2,500+ rpm it suggests maybe the lambdas are not working correctly or the throttle pots are a little out.
Jhonno said:
It has 2 new tp's and was setup 12months/2k ago.
I cannot get my software to connect to my ECU.. Need to try the 3 pin lead next.
Have you checked for cracks in the manifolds?I cannot get my software to connect to my ECU.. Need to try the 3 pin lead next.
I forgot that you need to have ignition on AND immobiliser off for the software to connect. Also set the port to COM1.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff