Air Filter(s) - DAZ?

[db484bhpv8]

Daz is probably the guy to answer this.

What size K&N do i need to order?
Also considering ordering 2 and doing the twin filter mod similar to Daz's.
Where and what bits of tubing did you buy Daz?

[Alexdaredevils]

[LongBaz383BHP]

Do you a filter at all on the strip

[db484bhpv8]

LongBaz383BHP said:

Do you a filter at all on the strip

I think its probably best to run without one as i keep blowing them to bits anyway but knowing my luck i would be following a car with sticky slicks and would hoover up a load of stones from the return road.

[LongBaz383BHP]

KEEP YOUR DISTANCE !

[db484bhpv8]

LongBaz383BHP said:

KEEP YOUR DISTANCE !

But its the only chance i get to overtake them.

[Sardonicus]

Actually Peter is the one to ask he sourced the higher flowing K&N filter from IIRC cos I sent him the link some time back it was a page with the flow specs etc

[phazed]

Derek, I'll look for that but I have the F piece that Daz has and won't be using it as my nose hasn't the room!

[db484bhpv8]

phazed said:

Derek, I'll look for that but I have the F piece that Daz has and won't be using it as my nose hasn't the room!

Cheers Peter.
I need to have at least one filter by Friday.
Is the inlet 3"?

[phazed]

I'll measure it shortly.

[SILICONEKID345HP]

They are the standard K&N`s . You can buy a much larger one from K&N with a larger throat ,that might work well with a reducer .I`m sure Peter has a larger one ,I mean air filter


I got the Sweep tee piece from fleabay but i don`t think it will fit the later cars .It did save my engine in a flash flood .

Edited by SILICONEKID345HP on Monday 18th August 19:19

[phazed]

Here you go Derek.

F piece and 2 x Pipercross air filters.

Before you say that K&N are better, that's debatable!

[SILICONEKID345HP]

phazed said:

Here you go Derek.

F piece and 2 x Pipercross air filters.

Before you say that K&N are better, that's debatable!

That`s a very nice pair

[db484bhpv8]

phazed said:

Here you go Derek.

F piece and 2 x Pipercross air filters.

Before you say that K&N are better, that's debatable!

You selling that Peter. Can you wack it in the post tomorrow and let me know what I owe you

[SILICONEKID345HP]

Jools tested my twin air filters on the dyno .Firstly connected then with a straight piece of pipe .Power loss was zero .

[spitfire4v8]

There's enough filtration there for 500 hp normally asprated. We did a test on Daz's car of his filter set up versus a straight pipe over the wing (ie no restriction). There's was nothing in it HP wise between the two.

[spitfire4v8]

[SILICONEKID345HP]

spitfire4v8 said:

But we did not test it with just one air filter ! maybe the results might of been the same .

[phazed]

db484bhpv8 said:

phazed said:

Here you go Derek.

F piece and 2 x Pipercross air filters.

Before you say that K&N are better, that's debatable!

You selling that Peter. Can you wack it in the post tomorrow and let me know what I owe you

PM me your address, I'll send it in the morning.

[db484bhpv8]

phazed said:

PM me your address, I'll send it in the morning.

PM sent thanks