Fiesta siesta hasta la vista
Discussion
Ok so i got a pair of mint fiesta rear lights with smoked indicators!
The old ones got very hot for some reason:
So i drilled two holes the let some heat out, should that ever become a problem
I took the old ones out and polished the pods from the inside with Meguiars sealant nr 20. Good stuff. Also gave the lights a polish to make them look like new.
Finished!
Not pictured... on the light with the reverse light on I used thin masking tape and red transparent paint, the white square in no longer visible under the pods like I did on the old fiestas:
The old ones got very hot for some reason:
So i drilled two holes the let some heat out, should that ever become a problem
I took the old ones out and polished the pods from the inside with Meguiars sealant nr 20. Good stuff. Also gave the lights a polish to make them look like new.
Finished!
Not pictured... on the light with the reverse light on I used thin masking tape and red transparent paint, the white square in no longer visible under the pods like I did on the old fiestas:
Edited by OleVix on Tuesday 16th September 22:16
Edited by OleVix on Tuesday 16th September 22:19
davo23 said:
What did you use to fix them in place? Sikaflex?
No mine are screwed in place, 3mm drill through the fiesta light and fibreglass in 3 places, normal wood screws with philips + head. If theres a gap in the bottom you can use black automotive "gum", looks like sika but isnt glue and never dries. OleVix said:
davo23 said:
What did you use to fix them in place? Sikaflex?
No mine are screwed in place, 3mm drill through the fiesta light and fibreglass in 3 places, normal wood screws with philips + head. If theres a gap in the bottom you can use black automotive "gum", looks like sika but isnt glue and never dries. davo23 said:
OleVix said:
davo23 said:
What did you use to fix them in place? Sikaflex?
No mine are screwed in place, 3mm drill through the fiesta light and fibreglass in 3 places, normal wood screws with philips + head. If theres a gap in the bottom you can use black automotive "gum", looks like sika but isnt glue and never dries. Gassing Station | Chimaera | Top of Page | What's New | My Stuff