Double valve springs mounting height?

[OleVix]

Hi all, Im putting together my heads and wondering whats the mounting height for the double valve springs? I have a complete mc1 cam kit from v8d but no instructions was included, and no shims/washers...

Ideas?

[phazed]

Try calling Rob direct, mobile or the V8D site.

He's the guy you really need to speak to.

[OleVix]

I see reelsteel sell shim packs, and I'll try calling Rob tomorrow. There was no cam card, just a cloyes wheel with three settings, retarded, normal or advanced... I'll go normal

[OleVix]

Ok, my neighbor workshop has all tools to set up GM engines, Ill ask him. The Rover is basicly a GM design, same firing order etc.

[phazed]

My last cam was running 110 degrees and it lined up exactly with the advanced keyway so check with a Rob.

[OleVix]

phazed said:

My last cam was running 110 degrees and it lined up exactly with the advanced keyway so check with a Rob.

good one