Driveshaft rebuilding, parts ?
Discussion
Few years ago but got my cv`s from here. Helpfull and good price for the proper ones.
http://www.prolinx.biz/
http://www.prolinx.biz/
Did mine earlier this year.
Bought a set from Dave Mac prop shafts in Coventry
Had a few issues putting it all back together
http://www.pistonheads.com/gassing/topic.asp?h=15&...
I get less shunting now too,
I used Norlock washers on mine, seems to be OK so far (done about 100 miles and none of the bolts have moved).
I suggest you get a tap just in case you have to clean the threads. I got one shaft one and the last bolt wouldn't engage. Had to take it all off again.
I've got a BTR diff which uses M10x 1.25 (metric fine) threads. Luckily I had an M8 helicoil kit and the tap for that is just about M10 fine.
Dave
Bought a set from Dave Mac prop shafts in Coventry
Had a few issues putting it all back together
http://www.pistonheads.com/gassing/topic.asp?h=15&...
I get less shunting now too,
I used Norlock washers on mine, seems to be OK so far (done about 100 miles and none of the bolts have moved).
I suggest you get a tap just in case you have to clean the threads. I got one shaft one and the last bolt wouldn't engage. Had to take it all off again.
I've got a BTR diff which uses M10x 1.25 (metric fine) threads. Luckily I had an M8 helicoil kit and the tap for that is just about M10 fine.
Dave
Edited by davelittlewood on Sunday 14th December 17:47
Gassing Station | Chimaera | Top of Page | What's New | My Stuff