Painting Aluminium. What Is Best Method
Discussion
Depends on how hot its going to get. Is it within the paints range?
Usual advice with ally is to etch prime first after cleaning & degreasing. I've used U-Pol Acid8 aerosols under car paint & not had a problem, but not used it in a high heat situation. Hammerite recommend using their own primer on ally.
Technical Data Sheet here:
http://www.alvinkeyclamp.co.uk/datafiles/Hammerite...
Usual advice with ally is to etch prime first after cleaning & degreasing. I've used U-Pol Acid8 aerosols under car paint & not had a problem, but not used it in a high heat situation. Hammerite recommend using their own primer on ally.
Technical Data Sheet here:
http://www.alvinkeyclamp.co.uk/datafiles/Hammerite...
Edited by paintman on Saturday 7th February 11:03
paintman said:
Depends on how hot its going to get. Is it within the paints range?
Usual advice with ally is to etch prime first after cleaning & degreasing. I've used U-Pol Acid8 aerosols under car paint & not had a problem, but not used it in a high heat situation. Hammerite recommend using their own primer on ally.
Technical Data Sheet here:
http://www.alvinkeyclamp.co.uk/datafiles/Hammerite...
Thanks paintman I will go over to that link, it wont be getting very hot as its 1.5 Meters above a log burning stoveUsual advice with ally is to etch prime first after cleaning & degreasing. I've used U-Pol Acid8 aerosols under car paint & not had a problem, but not used it in a high heat situation. Hammerite recommend using their own primer on ally.
Technical Data Sheet here:
http://www.alvinkeyclamp.co.uk/datafiles/Hammerite...
Edited by paintman on Saturday 7th February 11:03
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff