Nitron daamper - very fancy valving!
Discussion
Just dyno'd a set of Nitron Cerbera front dampers and I thought I would post the damper dyno plots for people to see - the valving on these is very clever stuff indeed!!
Here is a link to a post I wrote on another forum explaining how the graphs are obtained:
http://forum.wscc.co.uk/forum/index.php/topic/1118...
From this it can be seen that the behaviour of the damper shim stacks behave very differently in both rebound and compression when they are opening and closing which is what makes this dampers behaviour unusual.
and for comparison here is a 'Standard' Force Vs Displacement Plot:
I hope this post is seen as for info only!
Also Posted in TVR Thread
Here is a link to a post I wrote on another forum explaining how the graphs are obtained:
http://forum.wscc.co.uk/forum/index.php/topic/1118...
From this it can be seen that the behaviour of the damper shim stacks behave very differently in both rebound and compression when they are opening and closing which is what makes this dampers behaviour unusual.
and for comparison here is a 'Standard' Force Vs Displacement Plot:
I hope this post is seen as for info only!
Also Posted in TVR Thread
Edited by nikpro on Tuesday 24th February 20:42
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff