Vixen S3 ride height and suspension goemetry.

[simonpa]

I've got as far as putting the wheels on and dropping the chassis on the floor to check tehe geometry.
Looking at the difference in effective length of the lower/upper wishbones, it seems that ride height will be critical in setting up the camber, front and rear.

I can't find any useful chassis ride height settings - does anyone have recommendations?

I'm aiming to setup the camber with the car at a 'normal' height, just by slackening off the springs.
Once the engine/body are on. I will setup the loaded ride height using a basic flat-floor technique.

Any pointers greatly appreciated!

Cheers - Simon