Injector seals....
Discussion
Try
http://mrinjectoruk.co.uk
Steve Biggs
07860 350390
Take a picture of injector and any markings send to him.
I just got a set (4) for one of my Honda's for £28 posted
http://mrinjectoruk.co.uk
Steve Biggs
07860 350390
Take a picture of injector and any markings send to him.
I just got a set (4) for one of my Honda's for £28 posted
If you can measure them or get the measurements then i would say from polymax be cheaper then TVR places, i got my heat barrier orings from them.
http://www.polymax.co.uk/o-rings/
http://www.polymax.co.uk/o-rings/
waveydavey1000 said:
I'm going to change them the same time as I remove them, so need them beforehand, so I reckon I need a specalist TVR dealer?
Can anyone recommend one?
From the parts list aboveCan anyone recommend one?
"INJECTOR O RINGS (4.5)
Get them from any pug or Citroen dealer. £2
or from a Ford Granada/Scorpio"
You just need to find out what mainstream vehicle they were fitted to.
Great.
I might see if i can get a kit sourced for these.
Including baskets, cushions & seals.
Dave, could take a picture of the injectors please when you get them out and take a note of the markings?
Hopefully injector man will know what there off and have a kit available we can add to the parts list.
Cheers Craig
I might see if i can get a kit sourced for these.
Including baskets, cushions & seals.
Dave, could take a picture of the injectors please when you get them out and take a note of the markings?
Hopefully injector man will know what there off and have a kit available we can add to the parts list.
Cheers Craig
Gassing Station | Cerbera | Top of Page | What's New | My Stuff