Can anyone tell me which make of brake master cylinder

[Ron McC]

Can anyone tell me which make of brake master cylinder this is & what car's were they originally fitted to. The master cylinder is OK, it's the cap that's knackered as one of the electrical connection's has snapped off

TVR 3000M Turbo SE Brake master cylinder by RonMcC1, on Flickr

TVR 3000M Turbo SE Brake master cylinder by RonMcC1, on Flickr

TVR 3000M Turbo SE Brake master cylinder by RonMcC1, on Flickr

TVR 3000M Turbo SE Brake master cylinder by RonMcC1, on Flickr

Cheers,

Ron McC BOF246T

[bluezeeland]

Hi Ron,

Its a Ford Cortina MkV I believe, they were used on early Tasmin'/Wedges as well

Frank

(think you wanna call Adrian@exactlyTVR)

Edited by bluezeeland on Wednesday 8th April 22:02

[Ron McC]

Hi Frank.

Thanks for the info, much appreciated, had thought it might of been from a Triumph but wasn't sure.

A call to Adrian on the cards.

Cheers mate.

[DAKOTAstorm]

Ron I have the same cylinder and reservoir, with the same problem of the tab snapping. If you manage to solve this can you post on here how you achieved it. I have googled and rang every ford supplier online and no luck.

[bluezeeland]

I've changed the MC on mine a good few years back (not the reservoir or cap), got it from a co in the south, but can't for the life of me, remember their name ! (age and all that )They might be able to supply reservoirs or caps)
I'll have a root around in the invoices file for the car tonight, see if I can come up with something....

[bluezeeland]

Right, haven't got the supplier, couldn't find it........

However, did find that a lid from a Griff/Chim does fit, this one;

http://www.racetechdirect.co.uk/j0090-tvr-car-part...

you obviously need a connector for it, this one;

http://www.thetoolboxshop.com/0-012-73-junior-powe...

PM me for address to sent the single malt to............

grtz

Frank