Handbrake cable routing question?

Handbrake cable routing question?

Author
Discussion

barriejames

Original Poster:

895 posts

178 months

Friday 10th April 2015
quotequote all

Dear all a nice easy one for a Friday. I have been told my handbrake cable routing is incorrect please see attached pic. I have followed though everything I could find on cd and build sites, so I am puzzled, I think it could be that it is on the wrong side of rear chassis upright? Does any one know for sure?

Corsair613

260 posts

121 months

Friday 10th April 2015
quotequote all
The handbrake cable should pass to the outside of the main chassis rail and be clipped in place below the rear, lower wishbone attach point before making the arc up to the caliper. As shown here in the attached factory photo.

Ken


GtrMan

134 posts

148 months

Friday 10th April 2015
quotequote all
On my CD manual it shows that they are routed from inside as first picture quoted.

barriejames

Original Poster:

895 posts

178 months

Friday 10th April 2015
quotequote all
Many thanks I think that is the method. The method I have used has also been widely shown in pics and build site but I am going to re route to this

Corsair613 said:
The handbrake cable should pass to the outside of the main chassis rail and be clipped in place below the rear, lower wishbone attach point before making the arc up to the caliper. As shown here in the attached factory photo.

Ken