Bridge Mill Garage

[pggroves]

Just had a service ,which included new tyres, geometry check, MOT ,new passenger door mirror and other bits and bobs done by the guys at Bridge Mill on my P and J.
They are a real delight to deal with, nothing is too much trouble and car feels transformed.
Can't recommend them enough and really lucky to have superp indies just 30 miles away.
Also they seem to becoming Vanquish specialists as 3 there being fettled. Still think that and the DB5 are the best looking Astons.

[Ken Figenus]

Good to hear - up that neck of the wood soon. What do they typically charge for a stock spec 4 wheel alignment?

[Jockman]

Ken Figenus said:

Good to hear - up that neck of the wood soon. What do they typically charge for a stock spec 4 wheel alignment?

Phone them, Ken

I hear nothing but good stories about this company from very experienced PHers. If you are not a slave to the stamp then they are certainly worth considering

[Sump]

Sounded like pretty nice guys with the correct equipment but wanted more than Wilmslow for the service on my DB9 :/

[Jockman]

Sump said:

Sounded like pretty nice guys with the correct equipment but wanted more than Wilmslow for the service on my DB9 :/

Should've gone to Kwik Fit

[Sump]

I didn't trust them. I bidded to purchase them but they refused so it went to Wilmslow instead

[Jockman]

Can't believe Adam and the guys were more expensive than Wilmslow

Did you tell them that? When I had the DB9 I was quoted by JCT600, Wilmslow and Bridge Mill, with Wilmslow >always< being the most expensive.

Perhaps they are more competitive now? They doing a collect and deliver service for you?

[Jon39]

Sump said:

I bidded to purchase them ....

www.bidded.co.UK

[Jockman]

[Sump]

I called bridge mill first and then Wilmslow. They undercut them immediately. I didn't bother going back and forth as I preferred the dealer stamp.

[Sump]

Jon39 said:

Sump said:

I bidded to purchase them ....

www.bidded.co.UK

Very good.

[Jockman]

Sump said:

I called bridge mill first and then Wilmslow. They undercut them immediately. I didn't bother going back and forth as I preferred the dealer stamp.

JCT600 would have given you the stamp too

Even Maverick (Martin) would have given you a stamp of sorts and not charged you a penny !!!

[Sump]

Yes but that's in Leeds You don't work for Bridge Mill do you ?

I think it was a reasonable proposition not to break the FDSH.

Edited by Sump on Monday 27th April 13:07

[Jockman]

JCT600 is a Dealer who I'm sure would've been very competitive based on my 3 year experience

[Sump]

See edit. I've used them for my programming work when I was in Leeds but wanted someone in Manchester for the service.

[Jockman]

I live near Chester but on a collect / delivery service the geography isn't that important.

I never used Bridge Mill but I have friends (some on here) who have used them without issue before going to Works Service for big ticket items

[B4rnst4ble]

come on Phil we all know its Liverpool lets not try and upsell the area

[Jockman]

B4rnst4ble said:

come on Phil we all know its Liverpool lets not try and upsell the area

It's fookin Chester, Mike

According to google earth I'm 2 miles from Liverpool and 18 miles from Chester.

There you go.....bang in the middle

[F1 NDW]

B4rnst4ble said:

come on Phil we all know its Liverpool lets not try and upsell the area

ha ha, Liverpool my arse!!!! Phils much posher than that

[Jockman]

F1 NDW said:

ha ha, Liverpool my arse!!!! Phils much posher than that

Thanks Neil - I'm sure you'll vouch for Bridge Mill too

How's Korea....you all noodled out yet ??