Roof section replacement

[The Bogieman]

I was wondering if anyone knew if you can purchase replacement panels/sections for the Tuscan roof. The Targa roof is actually made up of 3 separate sections, the main centre section and two smaller sections at each side.
Unfortunately, I discovered this when the offside section of my 2000 Mk1 detached itself from the car on the motorway recently. Needless to say, I'm trying to source a replacement but am struggling to find one.
Thanks.

[S6 Devil]

Contact Julian Arnold at Fibreon. He has a mould for these. There are two types.

http://www.damagedtvrs.co.uk/products/parts/15

https://www.facebook.com/julian.arnold.3958?fref=u...

[Speed 3]

There's one on flea for just over a hundred sovs at the moment, doesn't say what year.

[The Bogieman]

Thanks for your assistance,

Fiberon were very helpful & have dispatched one out to me.

[Curdster]

Am I right in thinking that the first roof was made with the side wing/gutter as separate parts which were then glued and screwed onto the main section. The second roof was made as 1 unit. I have a 2000 which has the 3 parter and would like a 1 parter if my thinking is right? Therefore does anyone know what year the roof design/manufacture was changed?

[Speed 3]

Curdster said:

Am I right in thinking that the first roof was made with the side wing/gutter as separate parts which were then glued and screwed onto the main section. The second roof was made as 1 unit. I have a 2000 which has the 3 parter and would like a 1 parter if my thinking is right? Therefore does anyone know what year the roof design/manufacture was changed?

Dunno when the change was made but my 2004 certainly looks like its moulded as 1-piece.

[330p4]

Mine is 2002 with a one piece roof but be careful we tried my roof in a friends 2000 car as he has a problem with his and no way will it fit it is a mile out would need radical fibreglass work to fit
Ian

[Curdster]

Ian thanks for that. Saved me a few quid. Out of interest what was out? The length, width or the curve radius?