Performance tyre repair on shoulder
Performance tyre repair on shoulder
Author
Discussion

rockport

Original Poster:

8 posts

121 months

Friday 7th October 2016
quotequote all
Petrol heads,,

I’m looking for opinions on what to do regarding repair.. To set the scene I have just had all x4 MV1 alloys refurbed on my 330 along with x4 brand spanking new 18” Goodyear Eagle F1’s. I kid you not its been less than 2 weeks since fitment when I spotted a screw on the upper outside shoulder of the rear tyre. Pictures below help show my pain.

Its been 10+ years since I’ve sustained a nail or screw puncher of this type, and its sods law this happened days after fitment so im alittle out of touch with todays technology advances.

Some of the bigger named outfits have said the puncher is too close to the wall and can’t be repaired. Chances are if I took to a smaller independent shop I could get the repair done.

Question is… what would you do?

rockport

Original Poster:

8 posts

121 months

Friday 7th October 2016
quotequote all

CraigyMc

18,374 posts

267 months

Friday 7th October 2016
quotequote all
rockport said:
Petrol heads,,

I’m looking for opinions on what to do regarding repair.. To set the scene I have just had all x4 MV1 alloys refurbed on my 330 along with x4 brand spanking new 18” Goodyear Eagle F1’s. I kid you not its been less than 2 weeks since fitment when I spotted a screw on the upper outside shoulder of the rear tyre. Pictures below help show my pain.

Its been 10+ years since I’ve sustained a nail or screw puncher of this type, and its sods law this happened days after fitment so im alittle out of touch with todays technology advances.

Some of the bigger named outfits have said the puncher is too close to the wall and can’t be repaired. Chances are if I took to a smaller independent shop I could get the repair done.

Question is… what would you do?
Last question first: I'd buy a new tyre.

BS AU 159 covers this sort of thing. http://www.btmauk.com/wp-content/uploads/2014/12/M...

Your tyre will be more than a 200 profile on that car.
Consequently, that screw looks like it's outside of the legal area for tyre repair (within the middle 70% of the tread is legal, the 15% either side of that is not legal).

Just my tuppenceworth. Awful luck, by the way.

battered

4,088 posts

178 months

Friday 7th October 2016
quotequote all
I recently learned that you can have a vulcanised tyre repair done for about £30, once the tyre is off the wheel. This is to BS whatever and there are no restrictions on tread width because it's been revulcanised and is as good as new rather then being a simple plug repair. It can't be done by the rapidfit places, it takes 24 hours or so.

Bonefish Blues

36,978 posts

254 months

Friday 7th October 2016
quotequote all
battered said:
I recently learned that you can have a vulcanised tyre repair done for about £30, once the tyre is off the wheel. This is to BS whatever and there are no restrictions on tread width because it's been revulcanised and is as good as new rather then being a simple plug repair. It can't be done by the rapidfit places, it takes 24 hours or so.
yes

benjijames28

1,702 posts

123 months

Friday 7th October 2016
quotequote all
Take it on chin mate, new tyre.

rockport

Original Poster:

8 posts

121 months

Friday 7th October 2016
quotequote all
Thanks for the heads up on the vulcanising repair smile

Yes - awful luck, location of the puncher could have also been better placed.

Google isn't being too helpful, does anyone know of a vulcanising facility in the South London / Kent area? :\

trickywoo

14,282 posts

261 months

Friday 7th October 2016
quotequote all
rockport said:
Google isn't being too helpful, does anyone know of a vulcanising facility in the South London / Kent area? :\
http://tadworthtyres.com/tyres/car/

Maybe not quite your area but easy enough to get to.

I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.

Rich1973

1,286 posts

208 months

Friday 7th October 2016
quotequote all
I had a vulcanised repair done to a tyre only a few weeks ago, in a similar location to yours. Good as new and cost me £25. I am in Notts though so can't help you on a location.

edo

16,699 posts

296 months

Friday 7th October 2016
quotequote all
I'd get that repaired myself.

rockport

Original Poster:

8 posts

121 months

Friday 7th October 2016
quotequote all
trickywoo said:
http://tadworthtyres.com/tyres/car/

Maybe not quite your area but easy enough to get to.

I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.
TRICKYWOO!! you absolute legend!!!

I just spoke to the tadsworth and spoke to the most helpful adviser... He talked me through the process and im taking the car to him next weekend.

Cost £18 or there about's! much better than £170!!! ITs not local no.. but it only 20mins on the M25 and as you say, easy to get to!

Thanks a million!

Oilchange

9,743 posts

291 months

Friday 7th October 2016
quotequote all
Didn't know about this newfangled process, useful!

Gareth79

9,173 posts

277 months

Friday 7th October 2016
quotequote all
There's a place on the south coast (Fareham) that does vulcanised repairs (and has been for many years) - I know several people who have had them and it's perfectly safe http://www.ts-tyre-repairs.co.uk/

The places that can only do minor repairs will usually say it's "illegal" to repair outside that area either because they don't know about other repair methods or they just want to sell you a new tyre.

ashleyman

7,284 posts

130 months

Friday 7th October 2016
quotequote all
rockport said:
trickywoo said:
http://tadworthtyres.com/tyres/car/

Maybe not quite your area but easy enough to get to.

I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.
TRICKYWOO!! you absolute legend!!!

I just spoke to the tadsworth and spoke to the most helpful adviser... He talked me through the process and im taking the car to him next weekend.

Cost £18 or there about's! much better than £170!!! ITs not local no.. but it only 20mins on the M25 and as you say, easy to get to!

Thanks a million!
Can highly recommend those guys. Very close to me and I've used them quite a few times over the past few years. smile

GreigM

6,740 posts

280 months

Friday 7th October 2016
quotequote all
That would be fine with a normal repair - its not on the shoulder, its on the flat. I've done track days on repaired tyres with no ill effect, it is effectively as strong as the original tyre - if it wasn't repairing them wouldn't be legal. The places telling you it's too close to the shoulder are just looking to sell you tyres.

edo

16,699 posts

296 months

Friday 7th October 2016
quotequote all
GreigM said:
That would be fine with a normal repair - its not on the shoulder, its on the flat. I've done track days on repaired tyres with no ill effect, it is effectively as strong as the original tyre - if it wasn't repairing them wouldn't be legal. The places telling you it's too close to the shoulder are just looking to sell you tyres.
+1

Exige77

6,523 posts

222 months

Friday 7th October 2016
quotequote all
Puncture wink

trickywoo

14,282 posts

261 months

Friday 7th October 2016
quotequote all
rockport said:
TRICKYWOO!! you absolute legend!!!

biggrin

No probs. Sure they will do a good job for you.


Gio G

2,995 posts

240 months

Thursday 3rd November 2016
quotequote all
Hi all,

Just picking up on this thread, as took the advice on here..

Have to say that Tadworth tyres were brilliant and helped me out too. I had close to a brand new conti Sport Contact 3 (£250 at the time) puncture close to the shoulder, no one would repair. Visited Tadworth, £20 later and 1 hour wait, a hot vulcanised repair, good as new. Dealt with Glen and he was great, really knew his stuff.. Complete no brainer when the tyre is fairly new..




jon-

16,534 posts

247 months

Thursday 3rd November 2016
quotequote all
I'm not comfortable with the term "good as new".

I don't disagree vulcanise repairs are very effective, but it still leaves a weak spot on the tyre. Tyres are more than just lumps of rubber, there's a complicated carcass with many belt runs across the tread cap which punctures also damage. Lobbing a bit of warm rubber in this area does not make the tyre as strong as it was when new.

I know I'm being pedantic.