Noble M12 / MBE 975 wiring diagram
Discussion
Afternoon,
Hope everyone is enjoying the warmer weather.
I have a Noble ECU loom here, for the old MBE and a tired loom. Given the relative obscurity of these fine machines, information seems a bit scarce if you don't know where to look (and I do not).
I have a handle on the individual connectors and pin locations at that end, but at the ECU end I am struggling and obviously these days anything MBE is tricky to find decent info on at the best of times.
I am trying to go through things with a DMM, but it would speed things up hugely (and some things aren't possible with a DMM without further information) if anyone was kind enough to share a wiring diagram, or ECU pinout, or anything along those lines.
If there are variants of looms, I have two 'regular' sized relays (one with 2x 87 pins in a 5-Pin relay layout, seeming to cover coils and injectors) as well as a smaller red micro relay and the engine loom to chassis loom connector is a white 10-Pin connector with 6.3mm spade terminals in it.
That 10-Pin connector's pinout would be a god send, as would any pointers to a UK source for the (Ford Falcon, etc) coilpack connector and terminals.
Anyway, apologies for the wordy post, looks like a wall of text looking over it now.
Thanks for reading and any help will be greatly appreciated, thank you!.
Hope everyone is enjoying the warmer weather.
I have a Noble ECU loom here, for the old MBE and a tired loom. Given the relative obscurity of these fine machines, information seems a bit scarce if you don't know where to look (and I do not).
I have a handle on the individual connectors and pin locations at that end, but at the ECU end I am struggling and obviously these days anything MBE is tricky to find decent info on at the best of times.
I am trying to go through things with a DMM, but it would speed things up hugely (and some things aren't possible with a DMM without further information) if anyone was kind enough to share a wiring diagram, or ECU pinout, or anything along those lines.
If there are variants of looms, I have two 'regular' sized relays (one with 2x 87 pins in a 5-Pin relay layout, seeming to cover coils and injectors) as well as a smaller red micro relay and the engine loom to chassis loom connector is a white 10-Pin connector with 6.3mm spade terminals in it.
That 10-Pin connector's pinout would be a god send, as would any pointers to a UK source for the (Ford Falcon, etc) coilpack connector and terminals.
Anyway, apologies for the wordy post, looks like a wall of text looking over it now.
Thanks for reading and any help will be greatly appreciated, thank you!.
Gassing Station | Noble | Top of Page | What's New | My Stuff