Rear crash bar and brackets

[BrookST]

Folks, can I still get hold of the U shape brackets that hold the rear bumper on? Also, need the rear crash bar that runs across the back, behind the bumper, both bar and brackets badly corroded. TIA for any advice. 06 Monaro VXR

[dan mugglestone]

had exactly the same issue with mine . Not sure if theyre still available new but I found a good second hand one with a few patches of surface rust and lagging it with paint and wax.

Get into the rear sections while its all off and behind rear arches

[Lincsls1]

There's a pair of rough looking ones on eBay at present. Could be better than yours if really bad?
Might clean enough?

[Lincsls1]

https://www.ebay.co.uk/itm/324145389130?hash=item4...

[BrookST]

Got a crash bar from Days Part Yard and brackets from breaker in the UK

[BrookST]

Guys, rear crash bar has arrived but been let down by uk breaker on side mount brackets, anyone out there got 2 would be great
Part 12 in the image

[Lincsls1]

Part number 12 on the image is GM92100200 and is showing as still available?

https://www.gmpartsgiant.com/parts/gm-plate-921002...
https://www.gmpartsstore.com/oem-parts/gm-anchor-p...

https://www.ebay.com/itm/166006888050?hash=item26a...

Am I wrong?

[BrookST]

Looks good to me 👍 ordered, cheers, thanks for the link

[L2VXR]

BrookST said:

Looks good to me ?? ordered, cheers, thanks for the link

From the links I can't tell if if you have left and right brackets as they are handed .

I redesigned them slightly and had them lasercut/cnc bent in 3mm stainless .

[url]
|https://thumbsnap.com/3yYJkxv8[/url]



If you get desperate I could try and get some more knocked up but would have to get in touch with some contact to find out

Edited by L2VXR on Monday 19th June 20:31

[L2VXR]

Lincsls1 said:

Part number 12 on the image is GM92100200 and is showing as still available?

https://www.gmpartsgiant.com/parts/gm-plate-921002...
https://www.gmpartsstore.com/oem-parts/gm-anchor-p...

https://www.ebay.com/itm/166006888050?hash=item26a...

Am I wrong?

92100201 is the Left hand side (discontinued? )
92100200 is the Right hand side (showing as available)

[BrookST]

Yeah, order initially went through however email through to say refund has been made as part numbers are discontinued.

[BrookST]

L2VXR said:

BrookST said:

Looks good to me ?? ordered, cheers, thanks for the link

From the links I can't tell if if you have left and right brackets as they are handed .

I redesigned them slightly and had them lasercut/cnc bent in 3mm stainless .

[url]
|https://thumbsnap.com/3yYJkxv8[/url]



If you get desperate I could try and get some more knocked up but would have to get in touch with some contact to find out

Edited by L2VXR on Monday 19th June 20:31

L2VXR - if this is doable, it would be greatly appreciated

[L2VXR]

BrookST said:

L2VXR - if this is doable, it would be greatly appreciated

I'll make some enquiries today.
Could take a while sometimes I'm lucky and my stuff gets done straight away then other times I have to wait for stuff to get done.

[BrookST]

L2VXR said:

I'll make some enquiries today.
Could take a while sometimes I'm lucky and my stuff gets done straight away then other times I have to wait for stuff to get done.

Thank you

[L2VXR]

Another option possibly left + right

https://www.ebay.com.au/itm/Holden-VT-VX-Sedan-Mon...




https://www.ebay.com.au/itm/Holden-Monaro-VX-VY-VZ...

Edited by L2VXR on Tuesday 20th June 20:49

[L2VXR]

BrookST said:

L2VXR said:

I'll make some enquiries today.
Could take a while sometimes I'm lucky and my stuff gets done straight away then other times I have to wait for stuff to get done.

Thank you

Just to update ....my contact is on holiday at the minute so I'll catch him when he's back

[BrookST]

Hi L2VXR, thanks, I may have just got sorted, will confirm tomorrow, thanks again

[BrookST]

Got sorted, thanks for the offer buddy, it was very much appreciated

[BrookST]

Just underwent a full respray in Sting Red to freshen her up…

[Lincsls1]

^^^ Very nice! Look forward to the 'completed' pictures!