Been to see a Chim - Advice Please

Been to see a Chim - Advice Please

Author
Discussion

Mallard126

Original Poster:

3,445 posts

158 months

Thursday 9th May
quotequote all
As per the thread title, I've been to see a Chimaera farily locally to me this evening with a view to buying and would appreciate some advice/feedback on my assessment. It's the first one I've seen and the main things I was looking for seem to be in really good order e.g. the chassis is in excellent nick, outriggers replaced recently, consumables all serviced/replaced regularly and it runs and drives very nicely. A few bits I'm wondering if the collective can please help with. I'm wondering if these are typical for a 1999 car (there's one available for a similar price elsewhere but it's 110 miles away):

- Cosmetically it's a bit shabby in places:
- The driver's door has clearly scraped a wall down the leading edge so needs a bit of tlc/ paint repair.
- Plenty of stone chips which aren't a major fix but still need sorting.
- Driver's side doorcard is hanging off a bit at the top; there's a screw which has been located into filler that's popped out. Not sure how easy or otherwise a fix that is.
- Front splitter looks like it's a slightly different shade of blue to the rest of the car so I'm assuming has been replaced at some point and will need to be repainted.
- One wheel is darker than the others - it's a replacement for a slightly buckled wheel that comes with the car. Not a huge cost to get it repainted but another job to do
- Seatbelts very stiff and don't shoot back into position when released.
- Passenger window very slow to go up.

None of these jobs in isolation are huge but they all add up. I know you're going to get bits and pieces to sort with a classic car but I don't know how typical the list above is. It's not badly priced (£12.5k) but I'm not sure if the above could all be sorted for £1k or so or if it's going to be several times that in which case I'd be better off spending a bit more up front to save the hassle.

All feedback gratefully received, thanks.

indigochim

1,540 posts

131 months

Thursday 9th May
quotequote all
Mallard126 said:
- Front splitter looks like it's a slightly different shade of blue to the rest of the car so I'm assuming has been replaced at some point and will need to be repainted.

Splitter? Not sure what you mean by this is it some after market thing?

Mallard126 said:
Seatbelts very stiff and don't shoot back into position when released.
Many do this as tge belts run over a section of carpet if especially bad they're cheap to replace and improve if cleaned.

Mallard126 said:
- Passenger window very slow to go up.
Comon issue can be improved with better wireing and checking window guide/runners.


£12500 sounds cheap for a 1999 model I'd expect some work for one at that price.

Loubaruch

1,191 posts

199 months

Thursday 9th May
quotequote all
Initial advice would be to view a few more cars before parting with your hard earned.

If you are patient you will find a car that has been really cared for without the annoying minor problems, it may cost a bit more initially but could save you money long term. Join the TVR club and have a chat with members local to you.

The fronts of TVR's are very prone to stone chips, one of the problems with glass fibre.

s p a c e m a n

10,796 posts

149 months

Thursday 9th May
quotequote all
Honestly they're just posh kit cars.

Bits of the interior will come lose and you'll have to screw/glue/push them back into place. I wouldn't let one loose bit of trim put me off a car.

Windows go down when you get in the car and go up again when you park it. The majority of them are slow, underpowered and need lubricating. If you've owned a car for a while you forget how other people aren't used to it so don't realise how bad they are and don't bother lubing them after you've had to do it a few times. My passenger one needs pulling up by hand the last 3rd of the way hehe

Splitter?

As above with the seatbelts again. They also get trapped between the back of the seat and the carpet if you recline the seat back too far.

The paint and the wheels are down to your preference.

None of these things are issues in my eyes if the running gear and chassis is spot on. A chim needs constant fettling and looking after on tiny little bits and that's part of the enjoyment of owning one in my opinion. You don't just wash it, drive it and stand there looking at it out of the pub window, you also have something to tinker with.

Mallard126

Original Poster:

3,445 posts

158 months

Thursday 9th May
quotequote all
Sorry, when I say "splitter" I mean the bit of valance trim under the radiator. Thanks for the replies so far.

Sounds like the niggles with this one are fairly standard/easily sorted but I'll see if I can look at another one or two before buying anything.

andrewcliffe

986 posts

225 months

Thursday 9th May
quotequote all
My Chimaera had a front splitter on the front - looked factory - a piece of angled aluminium running the width of the front.


_DJ_

4,899 posts

255 months

Thursday 9th May
quotequote all
Yes, that's how they came from the factory.

Very easy to rip off on speed humps.

However, they're useful as they direct air up to the radiator and help with cooling

citizen smith

750 posts

182 months

Friday 10th May
quotequote all
Never seen a TVR seat belt retract quickly, or have I been unlucky in the TVR's that I have owned oer the past 24 years.

Perhaps it might be worth considering spending more now and saving in unseen costs in the future like Shocks, Paintwork, Trim, Engine & Clutch, Brakes etc.

Belle427

9,046 posts

234 months

Friday 10th May
quotequote all
Paintwork can be a deal breaker sometimes as the costs these days for paint are horrendous, especially if it's a rare colour.
You will find most cars carry lots of stonechips etc to the front nose area, most leave them alone due to cost but also the fact that a fresh paint job will start to pick them up anyway and annoy you even more.

Zeb74

383 posts

130 months

Friday 10th May
quotequote all
- Cosmetically it's a bit shabby in places:
- The driver's door has clearly scraped a wall down the leading edge so needs a bit of tlc/ paint repair.
- Plenty of stone chips which aren't a major fix but still need sorting.
- Front splitter looks like it's a slightly different shade of blue to the rest of the car so I'm assuming has been replaced at some point and will need to be repainted.

Everything which is related to the body condition can be expensive and you definitely need to find someone who is used to work on fiberglass. I guess this is easier in the UK than in France.



- Driver's side doorcard is hanging off a bit at the top; there's a screw which has been located into filler that's popped out. Not sure how easy or otherwise a fix that is.
- Passenger window very slow to go up.

Could be related. On mine, because I'm removing the door cards "frequently" (once a year or every 2 years max which is infinitely more than my other cars), for example to lubricate windows runners, screws are beginning to be loose. I have put expanding metal insert in place, this is very convenient.



- One wheel is darker than the others - it's a replacement for a slightly buckled wheel that comes with the car. Not a huge cost to get it repainted but another job to do

If you have to invest in this direction, and if current rims are standard ones, you can also see to change the size, for example with 16 inches front and rear, this is then more convenient to find tires.


- Seatbelts very stiff and don't shoot back into position when released.

Yes they are all. Worst case you can change with brand new securon 500/30, doesn't cost much and are also available with other colours than black.