M Series wiper blades
Discussion
davidy said:
Ian
They seem to vary in length, different people run with different length blades. I think Land Rover Defender Blades are the right length. I'd get you tape measure out, see what you'll think will kit and go buy some the right length!
davidy
cheers - I might have to go and see friend down at the MT and if they have any spares.....
I tried (unsussefully) to find a source ... in the end I just polished up my existing arms. You could try Trico or www.vintagecarparts.co.uk ... they have something that looks similar ..
Please let me know how you get on ..
Please let me know how you get on ..
Thanks all,
I'm going for the good quality stainless units from Europa.
Arms are £10.16 each
Blades are £7.46 each
Spend, spend, spend, but it beats putting your arm out of the window with a shammy!
The Vintage carparts ones also looked good but they don't do 14inch. prices were about the same.
Cheers
Alsk
I'm going for the good quality stainless units from Europa.
Arms are £10.16 each
Blades are £7.46 each
Spend, spend, spend, but it beats putting your arm out of the window with a shammy!
The Vintage carparts ones also looked good but they don't do 14inch. prices were about the same.
Cheers
Alsk
ATE399J said:
Have you looked here?
www.holden.co.uk/viewProducts.asp?supergroup=Hardware&analysiscode=0718&groupname=Wipers&group=040
www.holden.co.uk/viewProducts.asp?supergroup=Hardware&analysiscode=0718&groupname=Wipers&group=040
Splendid - just have to get the splines measured.
Ian
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff