07 XKR PCD

[XKRacer]

Anybody know the wheel PCD on the new XKR I have been informed it is different from the old?? Thanx

[cardigankid]

If we knew what a PCD was we might be better placed to advise you.

[XKRacer]

LOL Sorry engineer in me assuming everybody knows!

PCD = Pitch Circle Diameter this is the size the wheel nuts are placed at


I know the old XK was 120.65mm and I have acquired a set on 07 XK8/R wheels and they tell me the PCD is different this isn't a problem for me I would just like to know what it is so I can make the necessary changes

Edited by XKRacer on Wednesday 2nd May 07:18

[cardigankid]

I can't answer that I'm afraid.

But being a sport, I have asked the question on xkec.co.uk for you.

Edited by cardigankid on Wednesday 2nd May 21:32

[cardigankid]

The view is that the last model stud pattern is different and smaller. It matches the X-300 model whereas the current XK has the same stud pattern as the X-350 which is larger.

What the PCD is I don't know, but it must be in the current model handbook so I'll have a look at one.

For any info and other useful stuff on XK's I recommend paying the pretty modest fee and joining XKEC which you will find at xkec.co.uk

[shar2]

Hi Cardigankid AKA Sportingent. Unfortunately XKRacer it is not possible to use 2007 XK wheels on the older model. Apparently the PCD for the 2007 wheels is the same as the X350, X308 and XJ40.

[XKRacer]

shar2 said:

Hi Cardigankid AKA Sportingent. Unfortunately XKRacer it is not possible to use 2007 XK wheels on the older model. Apparently the PCD for the 2007 wheels is the same as the X350, X308 and XJ40.

That means the PCD is 108mm thats not a problem I will make them fit I have ways and means
Thanx for your time!

Edited by XKRacer on Thursday 3rd May 13:22

[cardigankid]

Hope they don't come off!