Help!!! Looking for schema of Vixen S2 chassis
Discussion
i have a S2 vixen
i need to rebuild the front,
the 2 main up tube are folded in motor fit and all the unit devit towards the left.
i need per exemple:
lenght beetween the big tube where the motor fit.
i don't know if the right/left tubes are // or if they deviate
suspension arm bracket, angle of suspension arm, ...
i think i will must make a plan himself and ask the forum the missing dimension
to make a good job, i will cut some tubes and i would like replace it exactly at the good place
Thank you
i think i write very bad english.....
i need to rebuild the front,
the 2 main up tube are folded in motor fit and all the unit devit towards the left.
i need per exemple:
lenght beetween the big tube where the motor fit.
i don't know if the right/left tubes are // or if they deviate
suspension arm bracket, angle of suspension arm, ...
i think i will must make a plan himself and ask the forum the missing dimension
to make a good job, i will cut some tubes and i would like replace it exactly at the good place
Thank you
i think i write very bad english.....
Julien,
I live in West London.
No, I replaced the chassis last year, and decided to restore the car completely instead of just replacing the chassis.
I can organise some photos of the old chassis if your interested. It was repaired, shott blasted and powder coated when I restored the car 10 years ago. The sill chassis tubes were replaced as part of the repair.
Darren
I live in West London.
No, I replaced the chassis last year, and decided to restore the car completely instead of just replacing the chassis.
I can organise some photos of the old chassis if your interested. It was repaired, shott blasted and powder coated when I restored the car 10 years ago. The sill chassis tubes were replaced as part of the repair.
Darren
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff