brake warning light?
Discussion
Sounds like a switch or wiring fault to me.
Have you tried pulling the connector off the switch in the top of the filler cap? If that makes the light go out then the switch is knackered. If not, then you have to dig a bit deeper into the wiring I'm afraid. Maybe verdigree in the connector or chaffed wires where they pass through the inner wing?
Best of luck
Plipton
Have you tried pulling the connector off the switch in the top of the filler cap? If that makes the light go out then the switch is knackered. If not, then you have to dig a bit deeper into the wiring I'm afraid. Maybe verdigree in the connector or chaffed wires where they pass through the inner wing?
Best of luck
Plipton
Gassing Station | Chimaera | Top of Page | What's New | My Stuff