1st Problem!!! Washer Fluid Leaking.

1st Problem!!! Washer Fluid Leaking.

Author
Discussion

ngt

Original Poster:

36 posts

251 months

Wednesday 16th July 2003
quotequote all
Washer fluid ran out on weekend I finally found refiller cap.(Why didn't they go the full hog and put it in front of the number plate!?) When I filled it up and tried it nothing worked.. except a stream of water on my shins. Looking under the dash I found a vent which I didn't know was there.. on opening this I looked thro vent and could see the washer tube end.. but through a piece of fibre glass so cannot get add it. I assume its fallen off the tee piece. Is there a way of getting at this without having to take the whole dash off!?!?

tonyrec

3,984 posts

255 months

Wednesday 16th July 2003
quotequote all
About 2 /3 weeks ago someone on here wrote a very informative set of notes for this very problem without having to remove the top of the Dashboard.

If you do a search for it you will find it.

Sadly i cant find it but i remember that the explanation was so good that it was earmarked for Ted to put in the archive etc.

Im sure someone on here will be able to remember when it was and find it for you.

>> Edited by tonyrec on Wednesday 16th July 19:13

Big Al.

68,864 posts

258 months

Wednesday 16th July 2003
quotequote all
YOU CALLED?

Try
www.pistonheads.com/gassing/topic.asp?t=43854&f=8&h=0
you could also check the FAQ's

Hope this helps.

>> Edited by Big Al. (moderator) on Wednesday 16th July 20:53

shpub

8,507 posts

272 months

Thursday 17th July 2003
quotequote all
Its an official dash out job as described in the bible 2 or you can cut through the front bulkhead to make an access hole.