No more PAS fluid leaks

[cloggy]

My Chim was having major leaks of PAS fluids.

Went to Perry Mott of the V8 Centre today who installed a conversion.
Being a braided hose made out of one piece instead of the rubber hoses.

Took about an hour to install.
The new hose cost £57 and installation was £50.(so £107.00 including VAT)

No more leaks, great.

Here is the hose.


Here it is installed

Edited by cloggy on Friday 21st March 15:58

[TOV!E]

that looks a good mod,i used to have problems on my chims,buy the way how long has perry been back in buisness, as he seemed to have dissapeared and is he still in the same place.........

[cloggy]

TOV!E said:

that looks a good mod,i used to have problems on my chims,buy the way how long has perry been back in buisness, as he seemed to have dissapeared and is he still in the same place.........

Perry now operates from Harefield, his mobile number is still the same.

[nikman]

Anyone know if/where I could buy just the 'one-piece' braided hose as pictured (to install myself)?

Nick.

[HRG]

Having just almost lost an arm replacing one of the jubilee clips on mine I'd probably be interested in one of these too.

[cloggy]

Here are Perry's contact details;

Perry Mott
V8 Customs
Dews Lane
Harvil Road
Harefield
Middlesex
UB9 6JN

Perry’s mobile number is 0795 7872615

[nikman]

Thanks Cloggy. Nick.

[hiltonig]

does this get rid off that horrible leaky U hose under the PAS pump ? a picture of the other end would be good. many thanks

[cloggy]

Sorry can't do photo as it is installed.
Instead of four Jubilee clips there are only two now, the first to connect to the resevoir and the second to the pump.

[Johno]

hiltonig said:

does this get rid off that horrible leaky U hose under the PAS pump ? a picture of the other end would be good. many thanks

You can see from the pic above. 2 jubilees now converted to 2 pressure joints. Only now 2 jubilees in whole set up, one at pump and one at reservoir.

The U bend is in the picture ?

[Zumbruk]

Oh, wow. Gimme. All I need then is someone to clean all the power steering fluid (and the cr*p stuck to it) off the engine.

[Pasco]

HRG said:

Having just almost lost an arm replacing one of the jubilee clips on mine I'd probably be interested in one of these too.

Yes i would like one also

I wonder if he would do a discount for a group buy

Any one else interested ?

[spend]

Pasco thought rather than said:

Mmmmm... Shiny things

Must have one for my precious :gurgle::gurgle:

[Pasco]

spend said:

Pasco thought rather than said:

Mmmmm... Shiny things

Must have one for my precious :gurgle::gurgle:

Shiny

[hiltonig]

yep I would like one too !!

[DavidLScott]

Ordered mine today.

[Pasco]

DavidLScott said:

Ordered mine today.

That's a pity i wonder if we could have saved some money had we ordered three

[DavidLScott]

Pasco said:

DavidLScott said:

Ordered mine today.

That's a pity i wonder if we could have saved some money had we ordered three

Sorry guys but I had to get it quickly as the Chim is in for a service in a few days and I had to make sure I got it in time. perry is making them to order.
My u-bend is permanently dripping now (ooooh matron)so needs doing urgently.

Fernhursts seem very interested in it so I told Perry I would put the word out.

[Pasco]

DavidLScott said:

Pasco said:

DavidLScott said:

Ordered mine today.

That's a pity i wonder if we could have saved some money had we ordered three

Sorry guys but I had to get it quickly as the Chim is in for a service in a few days and I had to make sure I got it in time. perry is making them to order.
My u-bend is permanently dripping now (ooooh matron)so needs doing urgently.

Fernhursts seem very interested in it so I told Perry I would put the word out.

That's ok fella BTW Are you the chap that sells Sillit Bang on telly

[Johno]

I may be interested as well Pasco . . depending on discount.