Top Wishbone 156
Discussion
Can't add anything to this as I have never tried it personally but might be of some use to you
http://www.alfaworkshop.co.uk/alfa_wishbone_replac...
http://www.alfaworkshop.co.uk/alfa_wishbone_replac...
Having done one, I'd say to try slackening off the anti-roll bar drop link nuts first. On my wife's car they were seized and I had the devil's own job getting them off - the hexagon hole in the middle just rounded off instantly! Other than that, not too bad a job but it's true that once all the bolts are out, you never think the assembly will come out! (It will though)!
Avocet said:
...the hexagon hole in the middle just rounded off instantly!
These caused me soooo much trouble when I replaced the springs on my Sportwagon. Big tip from a friendly mechanic (A4Alfa) was to make sure the head recess is clean before attempting to remove them.Also found standing on the brake disc/hub helped to provide clearance for the top wishy
wrinx
Edited by wrinx on Sunday 20th April 12:15
Gassing Station | Alfa Romeo, Fiat & Lancia | Top of Page | What's New | My Stuff