400 wheel badges.
Discussion
I made some out of black perspex .. there was a thread about it ages ago ( christmas time. ).
I still have some spares somewhere... if you want them...
www.btinternet.com/~jason.vaughan/Dscf0021.jpg
www.btinternet.com/~jason.vaughan/Dscf0022.jpg
www.btinternet.com/~jason.vaughan/Dscf0024.jpg
I still have some spares somewhere... if you want them...
www.btinternet.com/~jason.vaughan/Dscf0021.jpg
www.btinternet.com/~jason.vaughan/Dscf0022.jpg
www.btinternet.com/~jason.vaughan/Dscf0024.jpg
www.bress.freeserve.co.uk/wedge/maint_tvr_wheelbadge.html
Theres a good tip here in the maintenance section.
Theres a good tip here in the maintenance section.
'Sikoflex' - sounds like this would do the job of bonding the mounting ring back onto my headlamp (www.pistonheads.com/gassing/topic.asp?t=54194&f=12&h=0). Who stocks it? Ideally local to Farnham, Surrey. A search on the Web didn't turn up a stockist.
Thx - Streaky
Thx - Streaky
Had a similar problem myself with the badges - if and when the factory do run out - Autographix in Poulton-le-Fylde did the original wheel badges for the 400, they confirmed they would be able to make some new ones up with a scan of an original off one of the remaining wheels - not expensive either if memory serves.
Streaky - for the Silkoflex would suggest a local boat yard would be able to source some for you.
Streaky - for the Silkoflex would suggest a local boat yard would be able to source some for you.
I had some TVR wheel centres made up recently for the aftermarket 17" items on my car. Call Steve Morgan at Morgan Associates - He has the TVR logo on file and can make the badges any size with/without border, any backing and in the case of mine put a gently domed resin facing on them to give a plastic outer look. Four for £20 + dreaded vat - 01268-288587 or MorganSign@cs.com.
GB
GB
Gassing Station | Wedges | Top of Page | What's New | My Stuff