FS: New custom aluminum radiator, remote pump, etc

[msv]

I've been waiting about 13 weeks for my GTR kit to be ready to ship, and as of 2 days ago, my employer has informed me that they need me to work abroad for the next year minimum. Therefore, with much regret, I've had to cancel my order with Ultima, and I need to sell the custom parts I've had built.

I had a custom aluminum radiator built for me at C&R Racing, which is the premier builder of this sort here in the states. It is fitted with 38mm inlet and outlets to mate to the Ultima coolant pipes, and is fitted with 2 Spal 10" fans. The cooling system layout was redesigned to address the shortcomings in the layout of the system supplied by Ultima. I also had C&R build custom surge and overflow tanks. Contact me for details on the system layout, as I don't want to make this too lengthy. See the below links for pictures of the components. I have about $1300 USD in these components. Not only would they greatly increase the cooling efficiency, but it also saves nearly 20 lbs. off the front of the car. Thanks for your interest.

www.ourgarage.com/forsale/pictures/radiator_1.jpg
www.ourgarage.com/forsale/pictures/radiator_2.jpg
www.ourgarage.com/forsale/pictures/radiator_3.jpg
www.ourgarage.com/forsale/pictures/radiator_4.jpg
www.ourgarage.com/forsale/pictures/radiator_5.jpg

I also have a remote electric water pump from Meziere that flows 55 gallons per minute. It includes a 38mm hose inlet fitting to mate to the RH side alloy coolant tube, and 2 -12AN outlet fittings which then connect to individual -12AN fittings on the Chevy small block inlets. Though they aren't pictured, I will include these fittings too, they are ordered and should be in shortly. These components cost $450 USD.

www.ourgarage.com/forsale/pictures/waterpump.jpg

I can be contacted at [e-mail]

[PetrolTed]

Ads in the classifieds here please:

www.pistonheads.com/sales/submit.asp