s1 bits

[mmickgoodall]

Hi ive got the body off my s1 (chassis being shot blasted and painted) at the moment and am looking for some parts. Dose any one know where TVR got the brake master cylinder from? Ive heard its from Saab but cant find which one, as the fluid inlet elbows have imploded which I hear is common.
If any of you need pics/info of an S1 in bits to see where things are let me know.
Cheers all Mick

[Podie]

Think it's a Saab 9000 (non ABS)... do a search on the forums...

>> Edited by Podie on Thursday 18th December 11:17

[jims2]

Had the same problem with my S2 rebuild and only just got it solved, may not be the same
unit but give Neil a call at Peninsula, top bloke im sure he will be able to help.

[LeeBee]

I have one of these for sale if you are interested

Cheers

LeeBee

[mmickgoodall]

Thanks for replys. Leebee is the one you have new and where are you? im Newbury Berks. Thanks for the other responses ill invesitigate.
Cheers Mick.

[RichardR]

Hi Mike,

I told you that you'd get a result on here! There's also a bit of discussion on this subject here and here. These refer to an S2 and an S3, but they might be applicable.

Good luck!

Richard

[LeeBee]

It is not new but is in very good condition (it was my spare but my car is going to be fitted with a Tuscan servo unit so I no longer need it) it has been ultrasonically cleaned and I can fit stainless steel inserts to stop the hose clips squshing the tubes if you are interested

I'm just down the A34 in Oxford

Cheers

LeeBee

[mmickgoodall]

Thanks for your help everyone I should be able to sort out the problem now.