Friday 19th December 2003
Does anyone know how to remove the veneer dash behind the steering whell on a 450SE, the one with the speedo & rev counter in, is it as the centre dash with wing nuts on.
Any assistance would be appriciated.
Martin.
Friday 19th December 2003
On mine (400 so I think tha same) there is a bolt on the rear of the vaneer. You need to remove the nut, very fiddly. Its at the bottom in the middle. That removes the front bit. Then there is a metal plate that holds the clocks. That has 4 nut and bolts holding it in. One in each corner. On mine they now have large penny washers that grip the edges of the fibre glass surround. Hope this helps.
Tuesday 23rd December 2003
jmorgan
many thanks for your advise, my project over the Xmas break.
Have a good one.
Martin
Tuesday 23rd December 2003
Good luck. Just remembered that I couldn't fiddle the nut on the front part back on but it wedges in nice and tight (no pun intended).
Gassing Station | Wedges | Top of Page | What's New | My Stuff
